Recent research and development status of laser cladding: A review
In industries such as aerospace, petrochemistry and automobile, many parts of different
machines are under environment which shows high temperature and high pressure, and …
machines are under environment which shows high temperature and high pressure, and …
Recent trends in laser cladding and surface alloying
AA Siddiqui, AK Dubey - Optics & Laser Technology, 2021 - Elsevier
Laser cladding and surface alloying are surface modification techniques employed to
fabricate thin coating/layer with improved surface properties or to refurbish surface defects …
fabricate thin coating/layer with improved surface properties or to refurbish surface defects …
Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coating
Y Cui, J Shen, SM Manladan, K Geng, S Hu - Applied Surface Science, 2020 - Elsevier
The two-phase FeCoCrNiMnAl high entropy alloy cladding layer was produced by laser
cladding method, and its strengthening mechanism was studied. Using XRD, EDS, TEM and …
cladding method, and its strengthening mechanism was studied. Using XRD, EDS, TEM and …
Strengthening mechanisms in multi-phase FeCoCrNiAl1. 0 high-entropy alloy cladding layer
Y Cai, L Zhu, Y Cui, K Geng, SM Manladan… - Materials …, 2020 - Elsevier
In order to study the strengthening mechanisms in the multi-phase (FCC+ BCC) high-
entropy alloy cladding layer, FeCoCrNiAl 1.0 coating was fabricated by laser cladding …
entropy alloy cladding layer, FeCoCrNiAl 1.0 coating was fabricated by laser cladding …
Oxidation and Wear Mechanisms of FeCoCrNiMnAlx Cladding Layers at High-Temperature Condition
Y Cui, J Shen, S Hu, K Geng - Coatings, 2020 - mdpi.com
FeCoCrNiMnAl x high-entropy alloy (HEA) cladding layers were successfully fabricated on
H13 steel by laser cladding. The microstructure and properties of the FeCoCrNiMnAl x HEA …
H13 steel by laser cladding. The microstructure and properties of the FeCoCrNiMnAl x HEA …
Ni–WS2–Ti–6Al–4V self-lubricating coating on TC4 alloy by laser cladding
The Ti6Al4V is widely used in harsh working conditions where wear and tear are the
common phenomena. In order to enhance its performance and life, the laser cladding took …
common phenomena. In order to enhance its performance and life, the laser cladding took …
Effect of Cr content on microstructure and properties of Ni-Ti-xCr coatings by laser cladding
T Han, M Xiao, Y Zhang, Y Shen - Optik, 2019 - Elsevier
The alloy coatings were manufactured by laser cladding on Q235 mild steel. Coatings with
different Cr content consisted of different phases but contains common phases Cr, Cr 2 Ti …
different Cr content consisted of different phases but contains common phases Cr, Cr 2 Ti …
Laser cladding composite coatings by Ni–Cr–Ti–B4C with different process parameters
T Han, M Xiao, Y Zhang, Y Shen - Materials and Manufacturing …, 2019 - Taylor & Francis
To investigate the effect of laser process parameters on microstructure and properties of
composite coating, the composite coatings were manufactured by laser cladding Ni–Cr–Ti …
composite coating, the composite coatings were manufactured by laser cladding Ni–Cr–Ti …
[PDF][PDF] 激光熔覆原位制造复合氧化铝陶瓷涂层应力场研究
张玉燕， 方威， 李晨， 温银堂 - Laser & Optoelectronics Progress, 2023 - researching.cn
摘要针对新型铁颗粒增强型氧化铝陶瓷涂层在激光熔覆原位制造过程中的热应力对涂层质量的
严重影响, 研究了激光诱导反应条件下钛合金表面原位制备单道复合涂层过程中的热力问题 …
严重影响, 研究了激光诱导反应条件下钛合金表面原位制备单道复合涂层过程中的热力问题 …