Comparative studies on adsorption isotherm and kinetic for CO2 capture using iron oxide impregnated activated carbon
Activated carbon AC was treated with Kmn04 and the treated AC was used to be
impregnated with iron oxide. The ratio of 0.1 M KMnO 4 treatment on AC to the 0.1 M iron …
impregnated with iron oxide. The ratio of 0.1 M KMnO 4 treatment on AC to the 0.1 M iron …
[PDF][PDF] Adsorption kinetics for CO2 capture using cerium oxide impregnated on activated carbon
Various metal oxides of CeO2, ZnO, and Co3O4 impregnated on activated carbon (AC) were
synthesized to determine the CO2 capture efficiency and analyse with adsorption kinetics …
synthesized to determine the CO2 capture efficiency and analyse with adsorption kinetics …
[PDF][PDF] Kinetics and thermodynamic modeling for CO2 capture using NiO supported activated carbon by temperature swing adsorption
Solid sorbent from functionalized activated carbon (AC) could enhance the adsorption
capacity in CO2 capture. This study emphasizes cyclic CO2 capture using NiO …
capacity in CO2 capture. This study emphasizes cyclic CO2 capture using NiO …
[PDF][PDF] Adsorption Isotherm and Surface Analysis for the Carbonate Formation on Nano Coral-Shaped Iron (Iii) Oxide
K Nano, HING ING, SJS KUDA - Sains Malaysiana, 2023 - academia.edu
The α-Fe2O3 was synthesized using the hydrolysis method to obtain the nano coral-shaped
morphology. The adsorption isotherm and surface analysis upon CO2 adsorption were …
morphology. The adsorption isotherm and surface analysis upon CO2 adsorption were …
Lower desorption temperature in CO2 capture using various magnesium oxide loading on iron(III) oxide by ultrasonic-assisted synthesis: the adsorption-desorption …
This study introduces a novel approach to CO2 capture using the ultrasonic-assisted wet
impregnation technique with various MgO loadings on Fe2O3. This method allows for …
impregnation technique with various MgO loadings on Fe2O3. This method allows for …
Ultrasonic Assisted Synthesis of Bimetal Composite Strontium Oxide/Iron(III) Oxide for the Adsorption Isotherm Analysis of CO2 Capture
Carbon dioxide (CO 2) capture by the bimetal composite of strontium oxide impregnated on
iron (III) oxide (SrO/Fe 2 O 3) was studied. The adsorbent was calcined at 200–600° C and …
iron (III) oxide (SrO/Fe 2 O 3) was studied. The adsorbent was calcined at 200–600° C and …
Pengaruh Perbedaan Preparasi Lumpur Lapindo terhadap Kandungan Senyawanya
IF Ulfindrayani, N Fanani, Q A'yuni… - e-Prosiding …, 2019 - journal.unusida.ac.id
Abstract Semburan Lumpur Lapindo yang terjadi di Dusun Balongnongo Desa
Renokenongo, Kecamatan Porong, Kabupaten Sidoarjo hingga saat ini masih menimbulkan …
Renokenongo, Kecamatan Porong, Kabupaten Sidoarjo hingga saat ini masih menimbulkan …
Adsorption Isotherm Analysis for CO2 Capture Using Barium Oxide Impregnated Iron(III) Oxide by Ultrasonic-Assisted Synthesis
The barium oxide impregnated iron (III) oxide (BaO/Fe2O3) adsorbent was synthesized by
an ultrasonic-assisted method. The adsorbent was calcined at 200-500° C and its …
an ultrasonic-assisted method. The adsorbent was calcined at 200-500° C and its …
Temperature programmed desorption of carbon dioxide on activated carbon supported bimetallic oxides of Ni-Fe
The activated carbon (AC) supported bimetallic oxides of Ag-Fe/AC and Ni-Fe/AC were
synthesized by the wet impregnation method. The adsorbents were explored to study their …
synthesized by the wet impregnation method. The adsorbents were explored to study their …
[PDF][PDF] Effect of Transition Metals Addition on the Nickel Oxide Catalyst Toward Reduction Behaviour in Carbon Monoxide Atmosphere.
The chemical reduction progression behaviour of transition metals (Mo, Zr, W, Ce, and Co)
doped on NiO was studied using temperature programmed reduction (TPR) analysis. A wet …
doped on NiO was studied using temperature programmed reduction (TPR) analysis. A wet …