Fabrication methods for low-Pt-loading electrocatalysts in proton exchange membrane fuel cell systems
JH Wee, KY Lee, SH Kim - Journal of Power Sources, 2007 - Elsevier
While the use of a high level of platinum (Pt) loading in proton exchange membrane fuel
cells (PEMFCs) can amplify the trade off toward higher performance and longer lifespan for …
cells (PEMFCs) can amplify the trade off toward higher performance and longer lifespan for …
Synthesis methods of low-Pt-loading electrocatalysts for proton exchange membrane fuel cell systems
A Esmaeilifar, S Rowshanzamir, MH Eikani… - Energy, 2010 - Elsevier
While the use of a high level of platinum (Pt) loading in proton exchange membrane fuel
cells (PEMFCs) can amplify the trade off towards higher performance and longer lifespan for …
cells (PEMFCs) can amplify the trade off towards higher performance and longer lifespan for …
[HTML][HTML] Synthesis of highly dispersed Pt nanoparticles into carbon supports by fluidized bed reactor atomic layer deposition to boost PEMFC performance
The performance of proton exchange membrane fuel cells (PEMFCs) depends on the
controlled size, dispersion and density of Pt nanoparticles (NPs) on carbon supports, which …
controlled size, dispersion and density of Pt nanoparticles (NPs) on carbon supports, which …
[图书][B] Fuel cells: problems and solutions
VS Bagotsky - 2012 - books.google.com
The comprehensive, accessible introduction to fuel cells, their applications, and the
challenges they pose Fuel cells electrochemical energy devices that produce electricity and …
challenges they pose Fuel cells electrochemical energy devices that produce electricity and …
Self-supported nanostructured iridium-based networks as highly active electrocatalysts for oxygen evolution in acidic media
Due to the slow kinetics of the oxygen evolution reaction (OER), high precious metal
loadings are currently required at the anode of proton exchange membrane (PEM) …
loadings are currently required at the anode of proton exchange membrane (PEM) …
Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cells
AD Taylor, EY Kim, VP Humes, J Kizuka… - Journal of Power …, 2007 - Elsevier
We present a method of using inkjet printing (IJP) to deposit catalyst materials onto gas
diffusion layers (GDLs) that are made into membrane electrode assemblies (MEAs) for …
diffusion layers (GDLs) that are made into membrane electrode assemblies (MEAs) for …
Novel carbon aerogel-supported catalysts for PEM fuel cell application
A Smirnova, X Dong, H Hara, A Vasiliev… - International journal of …, 2005 - Elsevier
Novel carbon aerogel supported Pt catalysts with different pore size distributions and Pt
content have been synthesized and tested in a proton exchange membrane fuel cell …
content have been synthesized and tested in a proton exchange membrane fuel cell …
Investigation of hot pressed polymer electrolyte fuel cell assemblies via X-ray computed tomography
The hot pressing process for fabricating polymer electrolyte fuel cells membrane electrode
assemblies (MEAs) has been widely adopted, yet little is known of its effects on the …
assemblies (MEAs) has been widely adopted, yet little is known of its effects on the …
Fabrication of catalyst coated membrane with screen printing method in a proton exchange membrane fuel cell
A new proton exchange membrane fuel cell catalyst paste based on direct screen printing
was developed to fabricate membrane electrode assembly (MEA) with catalyst coated …
was developed to fabricate membrane electrode assembly (MEA) with catalyst coated …
Optimization of ionomer-free ultra-low loading Pt catalyst for anode/cathode of PEMFC via magnetron sputtering
In this study, thin-film Pt catalysts with ultra-low metal loadings (ranging from 1 to 200 μg
cm− 2) were prepared by magnetron sputtering onto various carbon-based substrates …
cm− 2) were prepared by magnetron sputtering onto various carbon-based substrates …