Rapid solidification cellular structures are known to play a crucial role in helping achieve
high strength and high ductility in 316L austenitic stainless steels fabricated by laser powder …

Evolution of microstructure and texture after heavy cold rolling and subsequent annealing in
a wide temperature range was first studied in an FCC equiatomic CoCrFeMnNi high-entropy …

The influence of the physical mechanisms activated during deformation and annealing on
the microstructure and texture evolution as well as on the mechanical properties in the …

This is the first of a two-part paper aimed at developing a robust framework for the collection,
quantification and simulation of 3D polycrystalline microstructures. Serial-sectioning …

The thermal treatment of a 30% cold-rolled Fe–28Mn–0.28 C Twinning-Induced Plasticity
(TWIP) steel was investigated. The low degree of rolling served to exclude the effect of shear …

Texture analysis was applied to determine the optimal processing parameters for the
thermomechanical treatment of an Fe–23Mn–1.5 Al–0.3 C twinning-induced plasticity steel …

In the present investigation, the effect of microstructure and texture on the evolution of
mechanical properties during recrystallization for 80% unidirectionally cold rolled UNS …

Lean duplex stainless steels (LDSS) have a microstructure composed of ferrite and
austenite phases. This microstructure provides good mechanical and corrosion resistances …

The hot deformation behavior and dynamic recrystallization (DRX) of super-austenitic
stainless steel were investigated by uniaxial compression in the temperature ranges of 1223 …

A series of measurements were designed to gain confidence in the interpretation of the peak
breadth in diffraction patterns collected from additively manufactured material, which has a …