A micromechanical model for the shrinkage anisotropy during sintering of metallic powders
is proposed and experimentally assessed. The framework developed for modeling sintering …

Various tests have been undertaken to study the effects of annealing, testing temperatures
and volume fraction of the Cu cladding on the properties of Cu-Nb conductors being …

Metastable silver-nickel alloys have been synthesized by chemical wetness and laser-liquid-
solid interaction techniques from nitrate and acetate precursors of silver and nickel. Ethylene …

The effort in materials program related to the first 100 T non destructive (100 T ND) magnet
has been concentrated on four areas:(a) development of the fabrication routes for various …

Welding dissimilar materials become inevitable in engineering industries. There are many
issues/problems associated with the welding of dissimilar materials, related to the welding …

A high strength pure copper conductor was fabricated by a cryogenic drawing process at 77
K where the dynamic recovery of copper was reduced. With this method, drawn pure copper …

The influence of microstructure on the corrosion behaviour of magnesium alloys has been
investigated using advanced microscopy approaches including optical microscopy, SEM …

ABSTRACT In this work, Automated Ball Indentation (ABI) technique is based on load
controlled multiple indentations (at a single penetration location) of a polished surface by a …

采用正交实验设计方法, 探讨了Co, W 和Ti 及其含量对镍基单晶高温合金持久性能的影响,
通过数学分析, 对合金成分进行了优化. 结果表明: 此合金系中Ti 含量对持久寿命影响最大, Co …

The butt joints of semi solid 356 were produced in as cast conditions by friction stir welding
process (FSW). This experiment studied in pre/post heat treatment (T6) using the welding …