Crevice corrosion kinetics of nickel alloys bearing chromium and molybdenum
NS Zadorozne, CM Giordano, MA Rodríguez… - Electrochimica …, 2012 - Elsevier
The crevice corrosion kinetics of alloys C-22, C-22HS and HYBRID-BC1 was studied in
several chloride solutions at 90° C. The crevice corrosion resistance of the alloys increased …
several chloride solutions at 90° C. The crevice corrosion resistance of the alloys increased …
The crevice corrosion of Alloy 22 in the Yucca Mountain nuclear waste repository
RM Carranza - JOM, 2008 - Springer
The susceptibility of Alloy 22 (N06022) to crevice corrosion may depend on environmental
and metallurgical variables. This paper summarizes the current findings regarding the effect …
and metallurgical variables. This paper summarizes the current findings regarding the effect …
Corrosion of Containment Materials for Radioactive-Waste Isolation
RB Rebak, RD McCright - 2006 - dl.asminternational.org
This article addresses the long-term corrosion behavior of high-level waste (HLW) container
materials, more specifically of the outer shell of the containers. It discusses time …
materials, more specifically of the outer shell of the containers. It discusses time …
Measuring the repassivation potential of alloy 22 using the potentiodynamic-galvanostatic-potentiostatic method
Traditionally, the susceptibility of Alloy 22 (N06022) to suffer crevice corrosion has been
measured using the Cyclic Potentiodynamic Polarization (CPP) technique (ASTM G 61) …
measured using the Cyclic Potentiodynamic Polarization (CPP) technique (ASTM G 61) …
Crevice corrosion resistance of Alloy 22 in high-nitrate, high-temperature dust deliquescence environments
T Lian, GE Gdowski, PD Hailey, RB Rebak - Corrosion, 2008 - meridian.allenpress.com
Abstract Alloy 22 (UNS N06022) has been selected as the corrosion-resistant barrier for the
nuclear waste containers in the proposed repository at Yucca Mountain. Alloy 22 may be …
nuclear waste containers in the proposed repository at Yucca Mountain. Alloy 22 may be …
The Electrochemical Behavior of Alloy 22 in Extreme Chloride and Nitrate Environments
RA Etien, SR Gordon, GO Ilevbare - NACE CORROSION, 2007 - onepetro.org
Alloy 22 specimens were tested in high temperature (100 to 160° C), high concentration
chloride and nitrate environments. Results of this study indicate that increasing nitrate to …
chloride and nitrate environments. Results of this study indicate that increasing nitrate to …
The “Practice Relevant Pitting Test”—A New Improved Test Method to Evaluate the Influence of Lubricants on the Pitting Load Capacity of Case Carburized Gears
BR Höhn, P Oster, T Radev… - Journal of ASTM …, 2007 - asmedigitalcollection.asme.org
Since the early 1700s, the art of coppersmithing has been used to construct watertight
roofing systems. For low slope, flat seam roofing systems, soldered locked seams and …
roofing systems. For low slope, flat seam roofing systems, soldered locked seams and …