Microstructural aspects have fundamental influences on the fatigue crack characteristics of
materials. In this paper, effects of inclusions, grain boundaries (GBs) and grain orientations …

The corrosion processes and its influence on the FCG curves of the 2524-T3 alloy joined by
FSW was studied in the nugget and BM. To assess the corrosion process, SVET, pH micro …

In this study, industrial 2524 aluminium alloy plates with various grain sizes (0.8–298 μm)
were prepared by cold rolling and heat treatment. The fatigue-crack-growth rate was studied …

This study focuses on the surface modification of 2524-T3 Al alloy substrates, highly
prospective in aeronautical sector, by niobium oxide films employing reactive sputtering …

The effects of pre-stretching prior to natural aging on the behavior of dislocation evolution,
the precipitation behavior, microstructure and mechanical properties of an in-situ TiB 2/2024 …

T3 aluminum alloy sheets with different grain sizes (13 μm, 59 μm, 178 μm, 355 μm, 126 μm,
and 87 μm) were prepared using methods such as rolling and annealing. The …

With the help of in-situ scanning electron microscopy (SEM) fatigue test, the fatigue crack
initiation and propagation behavior in a high strength 2524 aluminum alloy have been …

Intergranular stress corrosion cracking in the Al–Mg alloy AA5456-H116 is suppressed via
cathodic polarization in 0.6 M NaCl, saturated (5.45 M) NaCl, 2 M MgCl 2, and saturated (5 …

Abstract Effects of pre-strain on Cu-Mg co-clusters and mechanical behavior in a naturally
aged Al-Cu-Mg alloy were investigated by tensile and fatigue testing, transmission electron …

In the present work, the effect of artificial aging on the Cu-Mg co-clustering and mechanical
behavior in a pre-strained Al-Cu-Mg alloy are investigated by tensile and fatigue testing, X …