Measuring GNSS multipath distributions in urban canyon environments

P Xie, MG Petovello - IEEE Transactions on Instrumentation …, 2014 - ieeexplore.ieee.org
In general, standalone global navigation satellite systems (GNSS) receiver architectures
cannot provide a position accuracy suitable for use in vehicular applications in urban …

Vehicular position tracking using LTE signals

M Driusso, C Marshall, M Sabathy… - IEEE Transactions …, 2016 - ieeexplore.ieee.org
This paper proposes and validates, in the field, an approach for position tracking that is
based on Long-Term Evolution (LTE) downlink signal measurements. A setup for real data …

Kernel methods for accurate UWB-based ranging with reduced complexity

V Savic, EG Larsson, J Ferrer-Coll… - IEEE Transactions on …, 2015 - ieeexplore.ieee.org
Accurate and robust positioning in multipath environments can enable many applications,
such as search-and-rescue and asset tracking. For this problem, ultra-wideband (UWB) …

Vehicle localization using doppler shift and time of arrival measurements in a tunnel environment

R Halili, N BniLam, M Yusuf, E Tanghe, W Joseph… - Sensors, 2022 - mdpi.com
Most applications and services of Cooperative Intelligent Transport Systems (C-ITS) rely on
accurate and continuous vehicle location information. The traditional localization method …

RSS/TDoA-based source localization in microwave UWB sensors networks using two anchor nodes

S Ivanov, V Kuptsov, V Badenko, A Fedotov - Sensors, 2022 - mdpi.com
The manuscript presents an algorithm for the optimal estimation of the amplitude and
propagation delay time of an ultra-wideband radio signal, in systems for the passive location …

Hybrid fingerprinting and ray extension localization in NLOS regions

J Li, IT Lu, JS Lu - IEEE Transactions on Intelligent …, 2022 - ieeexplore.ieee.org
A general non-asymptotic theoretical analysis is developed for fingerprinting localization
system designs. Based on this analysis, hybrid fingerprinting and propagation-based …

Ray-tracing-assisted fingerprinting based on channel impulse response measurement for indoor positioning

PH Tseng, YC Chan, YJ Lin, DB Lin… - IEEE Transactions …, 2017 - ieeexplore.ieee.org
Position fingerprinting (FP), in which a common position signature is based on the received
signal strength (RSS), is one of the most efficient indoor positioning methods. Another …

Indoor TOA error measurement, modeling, and analysis

I Sharp, K Yu - IEEE Transactions on Instrumentation and …, 2014 - ieeexplore.ieee.org
This paper presents a comprehensive investigation on the error characteristics of time-of-
arrival (TOA) measurements obtained from positioning systems in indoor environments …

UWB propagation measurements and modelling in large indoor environments

C Briso, C Calvo, Y Xu - IEEE Access, 2019 - ieeexplore.ieee.org
In this paper, we present the results of the measurements and modeling of the propagation
channel for ultra wide band (UWB) communications in large indoor environments. The …

Performance research of real-time kinematic/5G combined positioning model

F Li, R Tu, J Han, S Zhang, M Liu… - Measurement science and …, 2022 - iopscience.iop.org
The global navigation satellite system provides real-time and all-weather positioning with
high accuracy. Under a good observational environment, short-baseline real-time kinematic …