The hot deformation behavior of fine grained Inconel 718 superalloy was investigated by
compression test in the temperature range of 950 to 1150° C and strain rate range of 0.1–10 …

The hot deformation behaviors of FGH98 nickel-based powder superalloy were
experimentally investigated and theoretically analyzed by Arrhenius models and machine …

A detailed understanding of the hot deformation and work hardening behavior of LDX 2101
dual phase steel has been obtained through a wide range of hot compression tests with …

Hot compression tests of Ti-10-2-3 alloy were carried out in the temperature range of 900–
1050° C, at strain rates of 0.001–1 s− 1 on a Gleeble thermo mechanical-simulator. The …

In this study, hot compression tests of GH690 nickel-based superalloy were carried out on a
Gleeble3180 thermo-mechanical simulator with strain rates of 0.1-2s− 1 and the temperature …

The high-temperature deformation behavior of near-alpha Ti-6242S alloy was investigated
at temperatures in the range of 850–1000℃ and at strain rates of 0.001-1 s− 1. The results …

Monel® 400 alloy is widely used in marine and chemical industries due to its moderate
strength and high resistance to corrosive environments. In the present work, hot workability …

In the present study, typical hyperbolic sine equation was found inappropriate to model the
flow behavior of a Fe-18Mn-8Al-0.8 C low-density steel in warm to hot deformation regime …

Hot compression tests of GH4698 alloy, a kind of Nickel alloy, were conducted by controlling
the temperature and strain rate within a certain range. The true stress–strain curves of the …

The present work is devoted to investigate the correlation between the Zener–Hollomon
parameter and the grain structure of the thermo-mechanically processed dual phase …