In this study, a new non-equiatomic and cost-effective high-entropy alloy (HEA), Al 8 Cr 12
Mn 25 Fe 35 Ni 20, was designed using thermodynamic parameters and prepared by arc …

A new biomaterial Ti–14Cr alloy was designed for biomedical applications. The
manufacturing process of Ti alloys through hot deformation is crucial for controlling the grain …

The development of new lightweight materials is required for the automotive industry to
reduce the impact of carbon dioxide emissions on the environment. The lightweight, high …

The dynamic recrystallization (DRX) and dynamic precipitation (DP) of grain boundary/intra-
granular (GB/IG) κ-carbides in a novel medium-Mn lightweight steel are investigated by …

Abstract 40CrNi steel is a low alloy steel with medium hardenability and has been widely
used in the manufacturing of crankshafts, wind turbine forgings, etc. As forging is usually …

Softening mechanism and microstructure evolution of 2A14 aluminum alloy were studied via
isothermal deformation tests under the temperatures range from 573 K to 773 K and strain …

In the present investigation, hot deformation behaviour of Fe–21Cr-1.5 Ni–5Mn alloy was
studied by performing isothermal unidirectional hot compression tests. The tests were …

A low-alloyed ultrahigh-strength steel comprising CrNiMoWMnV was designed based on
thermodynamic calculations and by controlling the microalloying elements to promote …

In order to characterize the flow behaviors of SAE 5137H steel, isothermal compression tests
at the temperatures of 1123 K, 1213 K, 1303 K, 1393 K, and 1483 K, and the strain rates of …

The high-temperature deformation characteristics of an ultrahigh strength steel is studied by
hot compression tests under the deformation temperatures of 920–1160° C and strain rates …