Abstract Iron-chromium-aluminum (FeCrAl) alloys are promising as corrosion-and oxidation-
resistant materials for high-temperature applications. However, further design and …

The detailed evolution of microstructure and microtexture during the annealing of warm-
rolled (WR) and cold-rolled (CR) 0.78 wt.% Cr extra-low-carbon steels was studied via …

An ultra-low carbon Ti-containing microalloyed steel has been thermo-mechanically
controlled rolled and water-quenched. Microstructural characterization of the samples finish …

A phase-field model has been developed to describe microstructure evolution during
intercritical annealing of a commercial DP600 dual-phase steel. The simulations emphasize …

The aim of this review is to present the underlying physical metallurgy for the development of
aluminium killed (Extra deep drawing--EDD) and interstitial free (IF) steels, their …

Friction stir welded SPCC low carbon steel plates were subjected to isothermal annealing
heat treatments at 600, 650, 675 and 700° C for various holding times. All the welds showed …

Abstract Strong η (< 100>∥ RD, rolling direction) recrystallization texture is successfully
developed through thickness in Fe 81 Ga 19 sheets with fine-grained microstructure by …

In the present study, Nb-stabilized ferritic stainless steel was prepared with annealing (430-
A) and without annealing (430-NA) annealing, and the microstructure of the resulting …

In the present study, the through-thickness texture evolution and grain colony distribution in
ferritic stainless steel under two different cold-rolling processes have been investigated with …

Martensitic transformation occurs after the final conformation in the quenching process of
martensitic stainless steels. Ferrite grains and Cr-rich carbides are observed in the …