Influence of secondary phases of AlSi9Cu3 alloy on the plasma electrolytic oxidation coating formation process
T Wu, C Blawert, ML Zheludkevich - Journal of Materials Science & …, 2020 - Elsevier
To understand the formation and growth of plasma electrolytic oxidation (PEO) coatings in
presence of different secondary phases in a substrate, PEO treatment was carried out on …
presence of different secondary phases in a substrate, PEO treatment was carried out on …
Micromechanisms and mechanics of ultra-mild wear in Al–Si alloys
M Chen, X Meng-Burany, TA Perry, AT Alpas - Acta Materialia, 2008 - Elsevier
The micromechanisms that control the sliding wear behavior of Al–Si alloys tested under
ultra-mild wear conditions were characterized using optical profilometry and electron …
ultra-mild wear conditions were characterized using optical profilometry and electron …
Interaction between nano-precipitates and dislocations during high temperature deformation of Al-Si alloys
The influence of nano-precipitates and dislocations on the static and dynamic
recrystallization of the Al-Si based alloy modified with additions of Ti-V-Zr and deformed at …
recrystallization of the Al-Si based alloy modified with additions of Ti-V-Zr and deformed at …
[PDF][PDF] Effect of copper addition on the microstructure and mechanical properties of Al-Si alloy
YM Abdulsahib - Al-Qadisiyah Journal for Engineering Sciences, 2014 - iasj.net
Aluminum alloys are very important in many industrial applications because of their lights
weight and good mechanical properties. There is a great need to recycle the metals and …
weight and good mechanical properties. There is a great need to recycle the metals and …
An Al–Si–Ti hierarchical metal–metal composite manufactured by co-spray forming
AJ Kelly, J Mi, GV Sinha, P Krug, F Crosa… - Journal of materials …, 2011 - Elsevier
Spray forming with co-injection of a solid particulate phase to form a homogeneous
distribution within the final spray formed billet has been studied as a new route to …
distribution within the final spray formed billet has been studied as a new route to …
Mechanics and mechanisms of surface damage in Al-Si alloys under ultra-mild wear conditions
M Chen - 2008 - scholar.uwindsor.ca
Al-Si alloys intended for use in engine components must operate under ultra-mild wear
(UMW) conditions to fit an acceptable amount of wear during a typical vehicle life. This study …
(UMW) conditions to fit an acceptable amount of wear during a typical vehicle life. This study …
[PDF][PDF] Texture of extruded Al-Al4C3 material
J Ďurišin, M Ďurišinová, K Besterci - Kovové materiály, 2007 - kovmat.sav.sk
Abstract Dispersion strengthened Al-Al4C3 material is characterized by high strength
properties and good temperature stability of structure. The wrought products have mostly …
properties and good temperature stability of structure. The wrought products have mostly …
Effect of Strain Level on the Behavior of Intermetallics and Texture of Al-Si-Cu-Mg Alloy Modified with Transition Metals
The uniaxial compression test was used to assess the influence of strain amount on the
behavior of precipitates and texture of the Al-7% Si-1% Cu-0.5% Mg alloy, modified with …
behavior of precipitates and texture of the Al-7% Si-1% Cu-0.5% Mg alloy, modified with …
[PDF][PDF] An Al alloy-Ti microfilament composite manufactured by co-spray-forming and accumulative deformation processing
A Kelly, J Mi, G Sinha, P Krug, F Crosa… - Proceedings of the …, 2010 - icaa-conference.net
Spray forming with co-injection of a solid particulate phase to form a homogeneous
distribution within the final spray formed billet has been studied as a new route to …
distribution within the final spray formed billet has been studied as a new route to …