The production of Portland cement (PC) which is the main binder in conventional
cementitious materials contributes about 7% to the world's anthropogenic carbon dioxide …

Waste-consuming green alkali-activated materials (AAM) or geopolymers can be used as a
new generation of cementitious materials to replace traditional Portland cement. However …

In this study, strain-hardening ultra-high-performance geopolymer concrete (SH-UHPGC)
was produced using Na2CO3, Na2SiO3 and their hybridization (1: 1 in mole ratio) as …

In the context of the contemporary emphasis on sustainability within the realm of
construction, there is a notable surge in attention towards one-part alkali-activated (OP-AA) …

There are many highly variable approaches to mix proportioning of alkali-activated materials
(AAMs), which considerably contribute to their great complexity and often incomparability of …

This paper investigates the possibility of accelerating the slowly progressive early reaction
process of sodium carbonate-activated slag mixtures by adding a small amount of sodium …

The hydration mechanism and strength development of sodium carbonate-activated slag-
based systems mainly depend on the additives used. Although the effects of mineral …

The development of alkali-activated materials (AAMs) to replace ordinary Portland cement
(OPC) under chloride-containing environments has been widely investigated by academia …

When exposed to carbonation, Na 2 CO 3-activated slag (SCAS) concrete demonstrated
53% mass loss and 57% reduction in compressive strength due to the decalcification of C …

The adhered mortar attached on the surface of recycled aggregate is the primary difference
between recycled aggregate and natural aggregate, and is the major reason for reducing its …