One of the important combustion chambers characteristic is the lean blowout (LBO) limits.
There are several ways to expand LBO limits. One of them is using pilot flame. The present …

When designing low-emission combustion chambers for gas turbine engines (GTE) and
power plants, determining their tolerance to high-amplitude pressure oscillations during …

Flame stability is one of the main challenges facing the different combustion applications. A
lot of undesirable phenomena such as blow-off and flashback may occur according to the …

One way to reduce the CO emission in the combustion chamber of a gas turbine engine is
the use of hydrogen additives in fuel. However, hydrogen has a high flame propagation …

The position of combustion chamber between compressor and turbine and combined action
of these elements imply that the working processes of all these elements are interconnected …

The method of integrated compressor/combustor simulation was used to investigate the
impact of flow distortion, appeared due to compressor blades, during the combustion …

При проектировании малоэмиссионных камер сгорания ГТД и ГТУ важным является
определение ее устойчивости к повышенным пульсациям давления при горении …

На основе анализа мирового опыта сформирована обобщенная физическая картина
пульсационного горения, а также схема расчетного исследования применительно к КС …

A large number of studies conducted in Russia and abroad have been devoted to the
development of low NOx emission gas turbine engines for aircraft and power stations …