High temperature erosive behavior of plasma sprayed NiCrAlY-25WC-Co/cenosphere
coating deposited on MDN 321 steel is investigated in the present work. Coating is …

Present investigation deal with NiCrAlY/WC-Co/Cenosphere/MoS 2/CaF 2, NiCrAlY/WC-
Co/Cenosphere/MoS 2/CaSO 4 and NiCrAlY/WC-Co/Cenosphere coatings deposited on …

This research examines the deposition of Cr 3 C 2-NiCr/cenosphere and Cr 3 C 2-NiCr
coatings on MDN 321 steel through the process of plasma spray. In this process, the solid …

Mullite coatings were fabricated by atmosphere plasma spraying (APS) at varying primary
gas flow rates. The flattening behavior of deposited particles as well as microstructure …

Mullite/ZrO2 coatings of the eutectic composition (80/20%(v/v) mullite/ZrO2) have been
flame sprayed on both ceramic and metal substrates. Being as-sprayed coatings mostly …

Although α-Al2O3 is commonly used as crude materials for preparing Al2O3 coating by
plasma spraying, the obtained coatings are mainly made up of γ-Al2O3 crystalline phase …

Oxidation is one of the major degradation phenomena observed in components subjected to
higher temperatures like in thermal power plants (boiler tubes), steam and gas turbines …

This paper focuses on optimization of process parameters for plasma sprayed Fly ash-
Titania composite coating using design of experiments. Standoff distance, feed rate and …

The primary mullitized andalusite powders were spray-dried and heat-treated to improve
sprayable capability. Then, mullite coating was deposited by atmospheric plasma spraying …

Plasma Sprayed coatings provide protection against corrosion, erosion and wear. Inconel-
718 is a metallic coating which has good wear and erosion resistance. This is plasma …