Steel with an ultimate tensile strength of 2500MPa, a hardness at 600–670HV and
toughness in excess of 30–40MPam1/2 is the result of exciting new developments with …

A model is reviewed, that describes the endpoint of carbon partitioning between
supersaturated ferrite and retained austenite. A new process, quenching and partitioning …

Expanded and revised to cover developments in the field over the past 17 years, and now
reprinted to correct errors in the prior printing, Phase Transformation in Metals and Alloys …

Steels: Structure and Properties, Fourth Edition is an essential text and reference, providing
indispensable foundational content for researchers, metallurgists, and engineers in industry …

Recent work has shown that bainitic ferrite plates produced by transformation at low
temperatures can be as thin as 20nm with a hardness in excess of 650HV. However, it may …

An alloy system based on iron is described in which it has been possible to create a high
density of interfaces by heat treatment alone. The resulting structure consists of a mixture of …

It is demonstrated that in a high-carbon steel where carbide precipitation is suppressed,
bainite can be obtained by isothermal transformation at temperatures as low as 200 C. The …

A fine-scale bainitic microstructure with high strength and high toughness has been
achieved by transforming austenite at 200° C. X-ray diffraction analysis showed the carbon …

The bainite transformation behavior after plastic deformation of austenite, ie, ausforming was
studied by in situ neutron diffraction and ex situ experiments, and the effects of ausforming …

Novel bainitic microstructures, consisting of slender ferrite plates (tens of nm) in a matrix of
retained austenite, have reported maximum yield strength of 1.4 GPa, ultimate tensile …