[HTML][HTML] 20 years of research on the Alcator C-Mod tokamak
The object of this review is to summarize the achievements of research on the Alcator C-Mod
tokamak [Hutchinson et al., Phys. Plasmas 1, 1511 (1994) and Marmar, Fusion Sci. Technol …
tokamak [Hutchinson et al., Phys. Plasmas 1, 1511 (1994) and Marmar, Fusion Sci. Technol …
Edge-localized-modes in tokamaks
AW Leonard - Physics of Plasmas, 2014 - pubs.aip.org
Edge-localized-modes (ELMs) are a ubiquitous feature of H-mode in tokamaks. When
gradients in the H-mode transport barrier grow to exceed the MHD stability limit the ELM …
gradients in the H-mode transport barrier grow to exceed the MHD stability limit the ELM …
Pellet-injector technology—brief history and key developments in the last 25 years
High-speed injection of solid fuel was first proposed in 1954 as a possible solution to the
problem of transporting fresh fuel across the confining magnetic fields into the plasma of a …
problem of transporting fresh fuel across the confining magnetic fields into the plasma of a …
High frequency pacing of edge localized modes by injection of lithium granules in DIII-D H-mode discharges
A Bortolon, R Maingi, DK Mansfield, A Nagy… - Nuclear …, 2016 - iopscience.iop.org
A newly installed Lithium Granule Injector (LGI) was used to pace edge localized modes
(ELM) in DIII-D. ELM pacing efficiency was studied injecting lithium granules of nominal …
(ELM) in DIII-D. ELM pacing efficiency was studied injecting lithium granules of nominal …
[HTML][HTML] Validation of the model for ELM suppression with 3D magnetic fields using low torque ITER baseline scenario discharges in DIII-D
Experiments have been executed in the DIII-D tokamak to extend suppression of Edge
Localized Modes (ELMs) with Resonant Magnetic Perturbations (RMPs) to ITER-relevant …
Localized Modes (ELMs) with Resonant Magnetic Perturbations (RMPs) to ITER-relevant …
Modelling of edge localised modes and edge localised mode control
Edge Localised Modes (ELMs) in ITER Q= 10 H-mode plasmas are likely to lead to large
transient heat loads to the divertor. To avoid an ELM induced reduction of the divertor …
transient heat loads to the divertor. To avoid an ELM induced reduction of the divertor …
Edge-localized mode avoidance and pedestal structure in I-mode plasmas
I-mode is a high-performance tokamak regime characterized by the formation of a
temperature pedestal and enhanced energy confinement, without an accompanying density …
temperature pedestal and enhanced energy confinement, without an accompanying density …
Effect of a deuterium gas puff on the edge plasma in NSTX
SJ Zweben, DP Stotler, RE Bell… - Plasma Physics and …, 2014 - iopscience.iop.org
This paper describes a detailed examination of the effects of a relatively small pulsed
deuterium gas puff on the edge plasma and edge turbulence in NSTX. This gas puff caused …
deuterium gas puff on the edge plasma and edge turbulence in NSTX. This gas puff caused …
Demonstration of object location, classification, and characterization by developed deep learning dust ablation trail analysis code package using plasma jets
C Liang, Z Ma, Z Sun, X Zhang, X You, Z Liu… - Review of Scientific …, 2023 - pubs.aip.org
Based on deep learning, a Dust Ablation Trail Analysis (DATA) code package is developed
to detect dust ablation trails in tokamaks, which is intended to analyze a large amount data …
to detect dust ablation trails in tokamaks, which is intended to analyze a large amount data …
Transition from no-ELM response to pellet ELM triggering during pedestal build-up—insights from extended MHD simulations
Pellet edge localized mode (ELM) triggering is a well-established scheme for decreasing the
time between two successive ELM crashes below its natural value. Reliable ELM pacing has …
time between two successive ELM crashes below its natural value. Reliable ELM pacing has …