The Ni60-based self-lubricating composite coatings on the surface of Ti6Al4V alloys were
successfully fabricated by laser cladding using different Ti 3 SiC 2 ceramic additions. The …

Inconel 690 alloy is widely used in nuclear steam generator tubes, which always suffer from
various complex fretting wear behaviors during their service period. This study aims to …

The purpose of this study is to investigate the mechanisms involved in the wear of cobalt-
based interfaces at high temperature. The studied contact is a cobalt-based alloy subjected …

Fretting wear evolution of γ-TiAl alloy was investigated. Evolution of wear scar, tribolayer
and wear debris were studied using optical microscope and scanning electron microscope …

Inconel X-750 alloy specimens were undergone the triple heat treatment process: solution
annealing (1149° C/2h), equalization treatment (843° C/24h), and precipitation treatment …

In order to avoid decomposition of solid lubricants during laser processing and improve the
lubrication stability of laser-clad self-lubricating coating, a novel multilayer structural WS …

Diamond-like carbon (DLC) is a promising solid lubricant owing to its excellent anti-friction
and wear-resistance characteristics. However, the high hardness of DLC causes two-body …

Fretting experiments of Alloy 690TT tubes against 405 stainless steel (405 SS) plates were
carried out to evaluate the influence of temperature on fretting performance of Alloy 690TT …

The purpose of this study is to investigate the protective glaze layer structure formed during
high temperature fretting wear process. The studied material is a cobalt-based alloy with a …

Metal matrix composites are widely used to improve the wear resistance of materials, and,
among these composites, WC-Co and Cr 3 C 2-NiCr (metallic binders) are the most common …