The main aim of this two-part article is to present and arrange the collected important
information on widely applicable Ni-based self-fluxing alloy coatings and to point to the …

The microstructural evolution, electrical conductivity, and mechanical properties of a cast Cu-
6Cr alloy were investigated after being homogenized at 900° C for 4 h, hot-rolled by 80 …

The generalized mixture rule (GMR) is used to provide a unified framework for describing
Young's (E), shear (G) and bulk (K) moduli, Lame parameter (λ), and P-and S-wave …

Abstract High-Velocity Oxygen Fuel (HVOF) is one of the most important thermal spraying
techniques for protective coating on pristine alloy surfaces by cermet feedstock powders. In …

The microstructures, mechanical properties and tribological behaviors in a wide temperature
range of high velocity oxygen fuel sprayed CoMoCrSi coatings before and after 800° C …

Coating magnesium alloy by PVD (Physical Vapor Deposition) process is highly essential
for the industrial applications. The PVD process parameters play an important role in …

Aluminum bronze (CuAl) coating reinforced by nickel cladded graphite (Ni-graphite) was
fabricated by air plasma spraying. Results show that the Ni-graphite had excellent interfacial …

The tribological simulation can be seen as a new study problem developed through modern
information technology and computer simulation technology in combination with a variety of …

WC-Co-Cr coatings are widely employed due to their improved wear resistance and
mechanical properties, however, the properties and performance of these coatings are …

In this study, four kinds of roughness structures were constructed on the Al alloy surface
using laser marking technology. The tribological properties of the surfaces under the …