This paper reviews the flow behavior and mathematical modeling of various metals and
alloys at a wide range of temperatures and strain rates. Furthermore, it discusses the effects …

The hot deformation behavior of Al-Mg-Si alloys was investigated by isothermal
compression tests in a temperature range from 400° C to 550° C and a strain rate range from …

The hot deformation behavior and microstructural evolution of homogeneous annealed
AA7020 aluminum alloy were investigated by isothermal compression tests over the …

In this study, the microstructure and tensile properties of selective laser melted AlSi10Mg at
elevated temperature were investigated with focus on the interfacial region. In-situ SEM and …

Isothermal uniaxial compression experiments were performed in the range of 300–450° C
and 0.001 to 10 s− 1 to clarify the hot deformation behavior of homogenized Al–5Mg–3Zn …

The hot compression tests for spray deposited alloy 2195 were performed on Gleeble-1500
thermomechanical simulator at different conditions. The constitutive models and processing …

In the present work, hot compression deformation behavior and microstructure evolution in a
homogenized Al–6Mg–0.8 Mn alloy with nano-sized Al 6 Mn phase particles were …

Abstract Al-7.3 Zn-2.2 Mg-2Cu alloy is known for its high strength, achieved because of
higher alloying concentration. However, the higher alloying concentration presents …

The 6xxx series aluminium alloys are extensively used in the structural applications of
automobile and aerospace. The strength of these alloys can be further improved by severe …

This work aims to investigate the influence of hot deformation parameters on the
microstructure evolution and deformation behavior of the extruded 2195 Al–Li alloy, as well …