Aerosol formation parameters are very important, as they are responsible for the ability of
spray-forming droplets to penetrate the area to which they are applied. Research into …

The Nomex honeycomb core has been widely used in many industrial fields, especially the
aircraft and aerospace industries, due to its high strength and stiffness to heaviness ratio …

A new prediction method was proposed based on the positive feedback relationship
between tool geometry and tool wear rate. Dry orthogonal cutting of Inconel 718 was used …

In recent times, manufacturing sectors are endeavouring to achieve optimal product quality
while minimizing costs. For the accomplishment of this objective, they are focusing on the …

Hard-to-cut metals like EN-31 steel are highly resistant to deformation, which increases the
forces involved during machining. These large cutting forces encourage higher tool …

In today's manufacturing industries, the machining stage is the most critical one. At some
point throughout their manufacture, most of the items need to be machined. This inclusive …

The concept of applying and studying the performance of new coolants is always the interest
of researchers to reduce the cost and environmental impacts with improved machining …