Failure mechanisms in DP600 steel: Initiation, evolution and fracture
H Ghadbeigi, C Pinna, S Celotto - Materials Science and Engineering: A, 2013 - Elsevier
Local deformation and damage mechanisms have been studied for a commercial DP600
steel using in-situ tensile testing inside a scanning electron microscope (SEM) in …
steel using in-situ tensile testing inside a scanning electron microscope (SEM) in …
Microscale-calibrated modeling of the deformation response of dual-phase steels
A combination of micropillar compression tests and microstructure-based numerical
simulations were used to determine the flow strength and strain rate partitioning in uniaxial …
simulations were used to determine the flow strength and strain rate partitioning in uniaxial …
Intercritical annealing of cold-rolled ferrite-pearlite steel: Microstructure evolutions and phase transformation kinetics
J Teixeira, M Moreno, SYP Allain, C Oberbillig… - Acta Materialia, 2021 - Elsevier
Abstract The manufacturing of Dual-Phase steels includes as a crucial step the annealing of
a cold-rolled ferrite-pearlite (F/P) microstructure, which involves numerous and interacting …
a cold-rolled ferrite-pearlite (F/P) microstructure, which involves numerous and interacting …
Low cycle fatigue performance of DP600 steel under various pre-straining paths
The present work concerns the assessment of low cycle fatigue performance of dual phase
steel subjected to change in uniaxial pre-strain path. An uniaxial pre-strain of 12.5% in the …
steel subjected to change in uniaxial pre-strain path. An uniaxial pre-strain of 12.5% in the …
Mechanical, microstructural behaviour and modelling of dual phase steels under complex deformation paths
J Liao, JA Sousa, AB Lopes, X Xue, F Barlat… - International Journal of …, 2017 - Elsevier
This paper aims to identify the mechanisms associated to the transient hardening behaviour
of dual phase steels under strain path changes, and to capture the observed material …
of dual phase steels under strain path changes, and to capture the observed material …
Micromechanisms of deformation in dual phase steels at high strain rates
The effect of strain rate (0.001–800/s) on two commercial ferrite-martensite dual phase
steels (DP600 and DP800), having different martensite contents (10.2% and 33.2 …
steels (DP600 and DP800), having different martensite contents (10.2% and 33.2 …
In-depth quantitative analysis of the microstructures produced by Surface Mechanical Attrition Treatment (SMAT)
Abstract Electron BackScattered Diffraction (EBSD) maps are used to characterize
quantitatively the graded microstructure formed by Surface Mechanical Attrition Treatment …
quantitatively the graded microstructure formed by Surface Mechanical Attrition Treatment …
Experimental and Visco-Plastic Self-Consistent evaluation of forming limit diagrams for anisotropic sheet metals: An efficient and robust implementation of the MK …
C Schwindt, F Schlosser, MA Bertinetti, M Stout… - International Journal of …, 2015 - Elsevier
In the present work, an efficient formulation for the prediction of forming-limit diagrams
(FLDs) based on the well-known Marciniak and Kuczynski (M− K) theory using a Visco …
(FLDs) based on the well-known Marciniak and Kuczynski (M− K) theory using a Visco …
Evolution of equiaxed and lamellar α during hot compression in a near alpha titanium alloy with bimodal microstructure
D Zhou, W Zeng, J Xu, S Wang, W Chen - Materials Characterization, 2019 - Elsevier
Microstructural evolution of equiaxed α and lamellar α during hot compression in a bimodal-
structure near alpha Ti-6Al-3Nb-2Zr-1Mo alloy were investigated. Focus was concentrated …
structure near alpha Ti-6Al-3Nb-2Zr-1Mo alloy were investigated. Focus was concentrated …
Effect of cooling rate on α variant selection and microstructure evolution in a near β Ti–5Al–3Mo–3V–2Cr–2Zr–1Nb–1Fe alloy
C Wu, Y Zhao, S Huang, Q Sun, L Zhou - Journal of Alloys and Compounds, 2020 - Elsevier
The microstructure evolution and selection of α variants in a new near β titanium alloy Ti-
5321 (Ti–5Al–3Mo–3V–2Cr–2Zr–1Nb–1Fe) were thoroughly investigated by dilatometry …
5321 (Ti–5Al–3Mo–3V–2Cr–2Zr–1Nb–1Fe) were thoroughly investigated by dilatometry …