This paper presents the results of the controlled sedimentation process for deasphalting,
caused by targeted formation of the fuel dispersed system components incompatibility …

Aluminum master alloys with rare earth metals are widely studied by many scientists around
the world, but research on the production of Al-Er master alloys is still limited. The purpose of …

High water-cut oil production is one of the major issues in the petroleum industry. The
present study investigates different profile control solutions, with an emphasis on selective …

Production of highly solidifying abnormal oils (with a paraffin content of over 30% by mass)
in the Far North is complicated by the intensive formation of asphalt-resin-paraffin deposits …

Increasing the field development efficiency of fractured reservoirs is a contemporary issue.
This paper presents fundamental and exploratory research results in this field using modern …

The paper evaluates the behavior of a red-mud solid fraction in a thickener feeder cup,
aiming to identify the main characteristics of particle distribution in the flocculation zone and …

The paper deals with a non-destructive method of detecting hydrogenated sections of
pipelines, which is based on variations of the level of mechanical stresses generated in the …

The results of studying the problem of active sediment formation when mixing residual fuels,
caused by manifestation of incompatibility, are presented. A laboratory method has been …

Recently, the technologies for the global modeling of the process of oil well drilling have
become widespread. Mathematical modeling is used in well design, virtual testing of various …

Within the past few decades, the production of high-wax oils at offshore fields in Vietnam has
been fraught with severe problems due to the intense formation of asphalt-resin-paraffin …