Applications of 3D point cloud data in the construction industry: A fifteen-year review from 2004 to 2018
Abstract 3D point cloud data obtained from laser scans, images, and videos are able to
provide accurate and fast records of the 3D geometries of construction-related objects. Thus …
provide accurate and fast records of the 3D geometries of construction-related objects. Thus …
A bibliometric analysis and review of building information modelling for post-disaster reconstruction
Post-disaster reconstruction (PDR) is a dynamic, complex system that is chaotic in nature,
and represents many challenges and issues. Recently, building information modelling (BIM) …
and represents many challenges and issues. Recently, building information modelling (BIM) …
Computational methods of acquisition and processing of 3D point cloud data for construction applications
Abstract 3D point cloud data from sensing technologies such as 3D laser scanning and
photogrammetry are able to capture the 3D surface geometries of target objects in an …
photogrammetry are able to capture the 3D surface geometries of target objects in an …
Towards effective BIM/GIS data integration for smart city by integrating computer graphics technique
The development of a smart city and digital twin requires the integration of Building
Information Modeling (BIM) and Geographic Information Systems (GIS), where BIM models …
Information Modeling (BIM) and Geographic Information Systems (GIS), where BIM models …
Semantic enrichment for BIM: Enabling technologies and applications
S Jiang, X Feng, B Zhang, J Shi - Advanced Engineering Informatics, 2023 - Elsevier
There is a serious information gap between different life-cycle stages and different BIM
platforms, semantic enrichment (SE) for BIM is an important solution to address this issue …
platforms, semantic enrichment (SE) for BIM is an important solution to address this issue …
A survey of applications with combined BIM and 3D laser scanning in the life cycle of buildings
The integration of building information model (BIM) with point cloud from 3-D laser scanner
provides powerful assistance in a variety of applications in the life cycle of building …
provides powerful assistance in a variety of applications in the life cycle of building …
Performance-based control of variability and tolerance in off-site manufacture and assembly: Optimization of penalty on poor production quality
M Arashpour, A Heidarpour… - Construction …, 2020 - Taylor & Francis
Defects and quality problems in off-site manufacturing of building parts are caused by
different variables. Subsequently, rework is required during on-site subassembly …
different variables. Subsequently, rework is required during on-site subassembly …
State of the art in damage information modeling for RC bridges–A literature review
M Artus, C Koch - Advanced engineering informatics, 2020 - Elsevier
In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4%
and 2% of its construction cost per year over its entire life cycle. This means that up to 80 …
and 2% of its construction cost per year over its entire life cycle. This means that up to 80 …
Towards generation of as-damaged BIM models using laser-scanning and as-built BIM: First estimate of as-damaged locations of reinforced concrete frame members …
Abstract After an earthquake, Terrestrial Laser Scanning (TLS) can capture point clouds of
the damaged state of building facades rapidly, remotely and accurately. A long-term …
the damaged state of building facades rapidly, remotely and accurately. A long-term …
Damage detection and finite-element model updating of structural components through point cloud analysis
K Ghahremani, A Khaloo, S Mohamadi… - Journal of Aerospace …, 2018 - ascelibrary.org
Accurate and rapid condition assessment of in-service structural components is critical to
ensure safety and serviceability. One major assessment consideration is the detection and …
ensure safety and serviceability. One major assessment consideration is the detection and …