Tests on infill masonry walls have been widely performed by many researchers and for a
long time with the main purpose of characterising the infill performance under earthquake …

The present study investigated concrete durability problems at the National University of
Sciences and Technology, Pakistan, through comprehensive analysis and non-destructive …

This paper analyses the effect of polyurethane injections on the seismic surficial response of
cohesionless soils. For this purpose, dynamic finite element numerical analyses were …

Vibration‐based methodologies are nowadays gaining increasing application for the
structural health monitoring and damage detection on buildings, especially damage due to …

Despite the seismic vulnerability of non-structural Exterior Infill Walls (EIWs), their resilient
design has received minimal attention. This study addresses the issue by proposing a novel …

A moderate earthquake with a magnitude M w of 6.8 hit the Elazig Province of Turkey on
January 24th, 2020, causing fatalities and structural damage/failure. Following the …

Most of the reinforced concrete buildings in Nepal are low-rise construction, as this type of
construction is the most dominant structural form adopted to construct residential buildings in …

Masonry-infilled frames (MIFs) are a common construction form in many parts of the world.
The presence of mortared masonry makes structural frames relatively stiff resulting in limited …

A new proposal has been applied using Bridge Information Modeling associated to
Terrestrial Laser Scanning TLS and photogrammetry to obtain the digital model of an …

Masonry infill walls are commonly used in the frames of reinforced concrete (RC) buildings
around the world. The seismic performance of these buildings is strongly affected by the …