Severe plastic deformation (SPD) can induce various phase transformations. After a certain
strain, the dynamic equilibrium establishes between defects production by an external force …

Severe plastic deformation can lead to the phase transformations in the materials. Even the
severe plastic deformation at ambient temperature is frequently equivalent to the heat …

The formation of ω-phase under high-pressure torsion (HPT) has been studied in Ti–Fe
alloys. Seven alloys with Fe concentration from 0 to 10 wt% have been annealed between …

The objective of this work is to prove whether the concept of effective temperature is
applicable to the severe plastic deformation (SPD). This concept was originally developed …

During severe plastic deformation (SPD), a steady-state is usually reached after a certain
value of strain (ie number of passes during equal-channel pressing or number of rotations …

Severe plastic deformation not only leads to grain refinement but also accelerates mass-
transfer and drives phase transformations in these Cu-based alloys. This review is devoted …

Ultrafine-grained and heterostructured materials are currently of high interest due to their
superior mechanical and functional properties. Severe plastic deformation (SPD) is one of …

Recent studies showed that structural changes in amorphous alloys under high pressure
torsion (HPT) are determined by their chemical composition and processing regimes. For …

Severe plastic deformation (SPD) frequently induces phase transformations like
decomposition of supersaturated solid solution, dissolution of precipitates, amorphization …

The high pressure torsion (HPT) of Ti–4 wt.% Fe and Ti–4 wt.% Co alloys has been studied.
Before HPT, the samples were annealed above and below the temperature of eutectoid …