Cords are used as reinforcing materials in rubber compounds. To increase cord/rubber
interfacial adhesion, they are coated by an adhesive (usually based on resorcinol …

Abstract Poly (ethylene terephthalate)(PET) cords are usually coated with epoxy and/or
isocyanate solutions (like methylene diphenyl diisocyanate [MDI]) before resorcinol …

Polymer adhesion and its evaluation are important from academic and industrial points of
view. Today cords are used to reinforce rubber in various products. Cord–rubber adhesion …

The adhesion between polyethylene terephthalate (PET) cord and nitrile-butadiene rubber
(NBR) has been compared. The PET cord treated by hydrated silica-resorcinol …

Generally, nylon and polyester cords are used to reinforce rubber compounds. These
composites are used in many sectors, such as tire and belt manufacturing. To increase …

Today cords are used generally for reinforcing rubber compounds. To increase interfacial
adhesion of cords to rubber, they are coated by an adhesive (usually RFL (resorcinol …

The effect of p-tert-Butylcalix [4] arene on rubber-nylon-6 fabric and rubber-metal bead wire
adhesion strength was quantified. For this purpose, two typically used rubber compounds …

Polyketone fiber, a newly developed super fiber, is available by copolymerization of carbon
monoxide and unsaturated hydrocarbon monomer, ethylene. Because of its high …

From the results of this study it can be concluded that higher stearic acid concentration as a
part of curing activator and high level of curative (ie sulfur and accelerator) causes higher …

Glycidyl methacrylate and N‐vinyl pyrrolidone have been grafted onto natural rubber at 32°
C using the simultaneous cobalt‐60 irradiation technique. The natural rubber samples were …