The performed tests showed that obtaining a finished product from the Al 2 O 3/Ti/Ni system
in the shape of a sleeve is possible using the Centrifugal Slip Casting method. A gradient …

This article presents the formation of composite microstructures by combining two
established concepts: centrifugal slip casting and the utilization of a magnetic field to control …

The results of our investigations of pressureless electron beam sintering of Al 2 O 3/Ti
composite in the fore-vacuum range of pressure are described. A novel kind of electron …

This work analyzed ceramic-metal composites from the Al2O3/Ti/Ni system produced by the
slip casting method. As starting powders, nanometric Al2O3, Ni and Ti of submicron size …

The article describes the formation of samples into pipes with NiAl 2 O 4 and TiAl 2 O 5
spinel phases with different metallic phase content. The centrifugal slip casting method was …

Metal casting is one of the oldest and most efficient manufacturing techniques in producing
metal components with complex shapes. One of the main challenges in the casting process …

Al2O3/Ti/Ni composites, enhanced with the inclusion of NiAl2O4 and TiAl2O5 phases,
represent a novel class of advanced materials with multifaceted properties suitable for …

This study aims to analyze the ceramic-metal composite Al2O3/TiO2/TiAl2O5 obtained using
the slip-casting method. Samples containing 50% vol. of the solid phase and 2% vol. and …

Yapılan bu çalışmada endüstride yaygın olarak kullanılan Al2O3'ün gevrek ve kırılgan olan
yapısının iyileştirilmesi adına ikinci faz takviyesi olarak Ti tozu kullanılmıştır. Matris fazı …

This work analyzed ceramic-metal composites from the Al2O3/Ti/Ni system produced by the
slip casting method. As starting powders, nanometric Al2O3, Ni and Ti of submicron size …