The role of the A-site cation and crystal structure on the electrical conductivity of strontium-doped calcium and barium manganites
The influence of A-site cation doping, crystal structure and structural defects (oxygen
nonstoichiometry) on the electrical conductivity of Sr-doped CaMnO 3 (CSMO) and BaMnO 3 …
nonstoichiometry) on the electrical conductivity of Sr-doped CaMnO 3 (CSMO) and BaMnO 3 …
Impact of Sintering Temperature on the Electrical Properties of La0.9Sr0.1MnO3 Manganite
La0. 9Sr0. 1MnO3 nanoparticles were prepared using the citrate–gel route and sintered at
different temperatures (TS= 600° C, 800° C, and 1000° C). The x-day diffraction patterns …
different temperatures (TS= 600° C, 800° C, and 1000° C). The x-day diffraction patterns …
Conduction mechanisms in lanthanum manganite nanofibers
Lanthanum manganites are being constantly investigated for their interesting magnetic and
transport properties. In this study, polycrystalline, single phase lanthanum manganite …
transport properties. In this study, polycrystalline, single phase lanthanum manganite …
Temperature-assisted phase pure sodium trivanadate thin film as a potential electrode for sodium-ion storage applications
The Sodium trivanadate thin films were successfully deposited by the cost-efficient spray
pyrolysis technique on flexible stainless steel as substrates for the first time. The XRD and …
pyrolysis technique on flexible stainless steel as substrates for the first time. The XRD and …
Designing copper–nickel hybrid nanoparticles based resistive sensor for ammonia gas sensing
Designing advanced and cost-effective materials for ammonia gas sensing is concomitantly
a challenging and crucial task. Herein, copper nickel (Cu–Ni) bimetallic hybrid nanoparticles …
a challenging and crucial task. Herein, copper nickel (Cu–Ni) bimetallic hybrid nanoparticles …
Distinguish the effect of Cu additive on complex electrical (dielectric/impedance) behaviors of ZnO thin films
The copper element (Cu) substituted ZnO with the common formula ZnO70/Cux/ZnO70 (x=
20, 50, and 70 nm) was manufactured using ALD and Dc magnetron sputtering techniques …
20, 50, and 70 nm) was manufactured using ALD and Dc magnetron sputtering techniques …
Understanding the transport properties of perovskite compounds as a function of temperature, frequency and DC-bias voltage using experimental measurements and …
W Hizi, H Rahmouni, K Khirouni - Physical Chemistry Chemical …, 2024 - pubs.rsc.org
The present paper provides interesting measurements and methodologies to investigate the
key factors controlling the electrical response of perovskite systems. The studied system was …
key factors controlling the electrical response of perovskite systems. The studied system was …
Thermoelectric performance and humidity sensing characteristics of La2CuO4 nanofibers
Thermoelectric and humidity sensing characteristics of single phase La 2 CuO 4 (LCO)
nanofibers were investigated. LCO nanofibers-based devices were fabricated and …
nanofibers were investigated. LCO nanofibers-based devices were fabricated and …
Investigation of size-dependent electrical, dielectric, and magnetic properties of iron oxide nanostructures
In this article we report magnetite (Fe 3 O 4) nanoparticles prepared via hydrothermal
technique at different reaction time and precursor's concentration. X-ray diffraction (XRD) …
technique at different reaction time and precursor's concentration. X-ray diffraction (XRD) …
Examination of charge-carriers hopping and identification of relaxation phenomenon and blocking effect in perovskite system
W Hizi, M Wali, H Rahmouni, K Khirouni… - The European Physical …, 2024 - Springer
Abstract La0. 8Na0. 2MnO3 perovskite is successfully synthesized using the conventional
solid-state reaction. X-ray diffraction diagram confirms the perovskite compound formation …
solid-state reaction. X-ray diffraction diagram confirms the perovskite compound formation …