Laves phases with their comparably simple crystal structure are very common intermetallic
phases and can be formed from element combinations all over the periodic table resulting in …

Additive manufacturing technologies based on melting and solidification have considerable
similarities with fusion-based welding technologies, either by electric arc or high-power …

Inconel 718 is a nickel-ferrous-chromium based superalloy extensively used in the
aerospace sector at elevated temperature up to 650° C due to its better mechanical …

High entropy alloys have emerged as novel engineering alloys with remarkable mechanical
properties in a wide range of temperatures. Among the several high entropy alloys that were …

A multi-scale model that combines the finite element method and stochastic analysis is
developed to simulate the evolution of the microstructure of an Nb-bearing nickel-based …

The heat affected zone liquation cracking behavior was studied in laser additive
manufactured Inconel 718. Liquation cracking was found initiating from the weak site near …

Nb segregation and Laves phase formation are known to be detrimental to mechanical
properties of Inconel 718. However, effective efforts to suppress Nb segregation and Laves …

Abstract Wire+ Arc Additive Manufacturing (WAAM) can be used to create large free-form
components out of specialist materials such as nickel-base superalloys. Inconel (IN) 718 is …

The effects of many process variables and alloy properties on the structure and properties of
additively manufactured parts are examined using four dimensionless numbers. The …

In this review paper, dissimilar welding between Inconel and austenitic stainless steel along
with its application has been outlined for high-temperature applications. The mechanical …