Wavelength-selective metamaterial absorbers in the mid-infrared range are demonstrated
by using multiple tungsten cross resonators. By adjusting the geometrical parameters of …

This paper presents the development of instrumentation for the measurement of high-
temperature thermal conductivity of bulk and coatings using a modulated photothermal …

Ultrashort pulse laser micromachining is affected by the heat accumulation resulting from the
residual heat from previous laser pulses on the sample surface. Up to now, most of the …

In this work, we investigate the temperature-dependent thermal conductivities of few
nanometer thick alternating stacks of amorphous dielectrics, specifically SiO 2/Al 2 O 3 and …

The ablation threshold and Laser-induced periodic surface structure (LIPSS) formation on
copper thin film were investigated using a picosecond laser (Nd: YAG laser: 266 nm, 42 ps …

The design, modeling, and experimental validation of a highly scalable phase change
electromechanical relay are present. The Phase Change NEMS Relay (PCNR) is a …

Self-heating effects (SHEs) in 3-D V-NAND flash memory are investigated using simulations.
First, temperature increase is estimated during the read operation, and a hot spot region …

Thermal properties of two types of porous silicon are studied using the pulsed-photothermal
method (PPT). This method is based on a pulsed-laser source in the nanosecond regime. A …

The thermal diffusivity of magnetocaloric materials has a transition point at a given
temperature that depends on the intensity of the applied magnetic field. Consequently, a fine …

Pulsed photothermal radiometry, a method developed in previous work for thin film thermal
effusivity measurements, is now further developed for the determination of thin film thermal …