In thermal spraying processes, molten, semi-molten, or solid particles, which are sufficiently
fast in a stream of gas, are deposited on a substrate. These particles can plastically deform …

Abstract A novel Cr 3 C 2-WC-NiCoCrMo and commercial Cr 3 C 2-NiCr thermal spray-
grade powders with particle size of− 45+ 15 μm were prepared by an agglomeration and …

High-velocity oxygen fuel thermal spraying is widely used in industrial production, and
coating hardness and density are closely related to the flight velocity of particles. In this …

A novel binary carbide-based sprayed powder, consisting of hard phases (Cr 3 C 2, WC)
and matrix phase (NiCoCrMo), was designed to ensure the harsh environments (corrosion …

HVOF thermal spraying with the fuel of aviation kerosene has unique advantages for
spraying WC-12Co ceramic particles. The time-varying evolution mechanism of the …

A novel Cr 3 C 2-based sprayed powder consisting of hard phase (Cr 3 C 2) and matrix
phase (NiCrMoNbAl) was tailored to meet the harsh environment (corrosion, wear, high …

TC18 titanium alloy, with low density, high strength and corrosion resistance, is a significant
material for the main load-bearing components of aircraft landing gear and other aviation …

Cr3C2-25NiCr coatings were deposited on stainless steel substrates by high velocity air-fuel
(HVAF) spraying. Friction and wear behaviors of as-sprayed and annealed coatings were …

High chromium content in Ni50Cr thermally sprayed coatings can generate a dense and
protective scale at the surface of coating. Thus, the Ni50Cr coating is widely used in high …

Considering the use of commercial-off-the-shelf (COTS) devices in industry, a case study
has been undertaken implementing the goal driven optimisation of a venturi-type pre-mixer …