Demand for the natural and synthetic fibres are increasing day by day due to the
development of high strength composites materials, especially in the production of …

Enhancing interfacial adhesion between functional coatings and target surfaces facilitates
long‐term stable service by mitigating interferences of mechanical mismatches. Design of …

Manufacturing complex metal matrix composite (MMC) structures by laser powder-bed
fusion (LPBF) could unleash their full potential but is difficult due to the presence of …

Abstract Copper (Cu)/diamond (D) composites have excellent thermal properties but are
hard to manufacture with conventional methods. Additive manufacturing (AM) can overcome …

The surface of continuous carbon fibers (C f) was modified with γ-Al 2 O 3, anatase-TiO 2
and yttria stabilized zirconia (YSZ) coatings in sol-gel route, and denoted by Al 2 O 3@ C f …

Selective laser melting (SLM) technique is a viable alternative to fabricating metal matrix
composites (MMCs) with controllable structures; however, its implementation remains …

High-crystalline nanodiamond powder was formed during pulsed discharge of carbon fiber
wires in distilled water at room temperature. The copper-foil-encapsulated carbon fiber wires …

To improve the application of molten salt method in carbon fibers (CFs) surface modification,
the work explores the effect of the CFs-itself crystallinity on the formation and growth …

The mechanical properties of composite coatings of silicon carbide on graphite, deposited
by a new method of annealing the initial graphite in contact with a silicon melt in an …

This study presents a novel two-step molten salt strategy (TMSS) for synthesizing titanium
carbide (TiC) coatings on diamonds using NaCl-KCl-LiCl salt. By utilizing TMSS, we …