Solar desalination is rising as the most prominent option to tackle water scarcity in every
aspect of sustainable development. Much research has been done in the past that showed …

The demand for lightweight, high specific strength alloys has drastically increased in the last
two decades. Magnesium and aluminum alloys are very suitable candidate materials …

Fused deposition modeling (FDM) is a popular additive manufacturing technique, but
attaining optimal processing variables continues to be a significant challenge. The design of …

Copper matrix composites (CMC) are frequently used in the automotive, aerospace,
construction, and electrical-electronics industries. Properties such as low density, improved …

The aim of the present work is to investigate vickers hardness, wear behavior as well as to
perform optimization of wear data for pure Al and Al-Al2O3-TiO2 hybrid metal matrix …

The main objective of this work was to improve the mechanical properties of a copper alloy,
ie, 88Cu–8Ni–4Sn (wt.%), without causing a significant reduction in its outstanding electrical …

This study focuses on a comparative analysis of mechanical behavior and microstructural
characteristics of Cu matrix (C87600) based hybrid composites reinforced with SiC-Grp and …

In this research, AA2024 aluminum alloy-based surface composites were fabricated using
ex situ titanium boride particles (TiB2) as reinforcement using the friction stir processing …

Abstract In this study, Cu/Ti–B-SiC p hybrid composite materials were produced by powder
metallurgy method using three different sintering temperatures (950, 1000, 1050° C). The …

Cu/graphite composites are widely used in various fields as friction materials. However, their
tribological properties are limited by the inadequate wettability between Cu and graphite …