Temperature-Adaptive Ultralubricity of a WS2/aC Nanocomposite Coating: Performance from Room Temperature up to 500 °C
This study reports on the ultralubricity of a high-temperature resilient nanocomposite
WS2/aC tribocoating. The coefficient of friction of this coating remains at around 0.02 …
WS2/aC tribocoating. The coefficient of friction of this coating remains at around 0.02 …
Enhanced corrosion inhibition of low carbon steel in aqueous sodium chloride employing sol–gel-based hybrid silanol coatings
TS Hamidon, NA Ishak, MH Hussin - Journal of Sol-Gel Science and …, 2021 - Springer
The anti-corrosion properties of sol–gel-based hybrid silanol coatings incorporated with
span tea leaves extract employed on low carbon steel in saline solution was explored by …
span tea leaves extract employed on low carbon steel in saline solution was explored by …
Enhancing mechanical properties and cutting performance of industrially sputtered AlCrN coatings by inducing cathodic arc glow discharge
The average ion energy per deposited atom (E d) is defined as the product of the ion energy
(E i) and ion-deposition flux ratio (J i/J d) in magnetron sputtering deposition. E d captures …
(E i) and ion-deposition flux ratio (J i/J d) in magnetron sputtering deposition. E d captures …
Effect of substrate bias voltage on the composition, microstructure and mechanical properties of WBC coatings
Commercial ceramic protective coatings usually exhibit high hardness, but low ductility
impairs their performance and application-oriented properties. Accordingly, a state-of-the-art …
impairs their performance and application-oriented properties. Accordingly, a state-of-the-art …
The effect of chemical composition on the structure, chemistry and mechanical properties of magnetron sputtered WBC coatings: Modeling and experiments
Ternary WBC coatings were non-reactively deposited in order to enhance the envelope of
the mechanical properties of the binary transition metal borides and carbides with a focus on …
the mechanical properties of the binary transition metal borides and carbides with a focus on …
Design of pulsed neon injection in the synthesis of WBC films using magnetron sputtering from a surface-sintered single powder cathode
The surface sintering approach was examined in the present manuscript to obtain single
cathode material consisting of multiple elements. Design of electromagnetic discharge …
cathode material consisting of multiple elements. Design of electromagnetic discharge …
Phase formation, thermal stability and mechanical properties of Nb-BC coatings prepared by combinatorial magnetron sputtering
In this study, combinatorial magnetron sputtering was used to deposit Nb-BC coatings in a
wide composition range. The phase formation, thermal stability and mechanical properties of …
wide composition range. The phase formation, thermal stability and mechanical properties of …
Synthesis and characterization of Ta–B–C coatings prepared by DCMS and HiPIMS co-sputtering
This study reports on the deposition and properties of Ta–B–C coatings by the co-sputtering
of tantalum, boron carbide, and graphite targets using High Power Impulse Magnetron …
of tantalum, boron carbide, and graphite targets using High Power Impulse Magnetron …
W 4f electron binding energies in amorphous WBC systems
In this paper, we critically evaluate the applicability of the procedure proposed in [Mirzaei et
al., Surf. Coat. Technol. 358 (2019) 843–849] which is based on the fitting of the XPS …
al., Surf. Coat. Technol. 358 (2019) 843–849] which is based on the fitting of the XPS …
Effect of bonding structure on hardness and fracture resistance of WBC coatings with varying B/W ratio
Low ductility and brittle deformation behaviors are major drawbacks of currently used
commercial hard ceramic-based protective coatings. Recent ab-initio calculations revealed …
commercial hard ceramic-based protective coatings. Recent ab-initio calculations revealed …