Recent advances in electrophoretic deposition of thin-film electrolytes for intermediate-temperature solid oxide fuel cells
EY Pikalova, EG Kalinina, NS Pika - … and Technologies. 2023. Vol. 2.№ 1, 2023 - elar.urfu.ru
Solid oxide fuel cells (SOFCs) have been attracting considerable attention as ecologically
friendly and highly efficient power sources with a variety of applications. Modern directions …
friendly and highly efficient power sources with a variety of applications. Modern directions …
Beneficial effect of low BN additive on densification and mechanical properties of hot-pressed ZrB2–SiC composites
SH Shafagh, S Jafargholinejad, S Javadian - Synthesis and Sintering, 2021 - synsint.com
The incorporation of 1 wt% hexagonal BN (hBN) into ZrB 2–30 vol% SiC could noticeably
better the fracture toughness, hardness, and consolidation behavior of this composite. This …
better the fracture toughness, hardness, and consolidation behavior of this composite. This …
[HTML][HTML] Oxidation inhibition of 3D printed porous steel by ceria-activated multilayers
Z Zhou, VK Nadimpalli, AR Lalwani, S Wang, Y Shang… - Corrosion …, 2023 - Elsevier
Abstract A 3D-printed porous 410 L steel support with a novel ceramic multi-coating is
fabricated to improve the oxidation resistance of porous metal components for extreme …
fabricated to improve the oxidation resistance of porous metal components for extreme …
Enhanced CMAS and hot corrosion degradation of YSZ thermal barrier coating with nano powders
Thermal barrier coatings are used to protect hot section parts of gas turbine engines. These
coatings are subject to corrosion due to impurity elements in the fuel and dust absorbed from …
coatings are subject to corrosion due to impurity elements in the fuel and dust absorbed from …
Design, preparation, and characterization of Yttria-Stabilized Zirconia (YSZ) coatings obtained by electrophoretic deposition (EPD)
JL Pantoja-Pertegal, A Diaz-Parralejo… - Ceramics …, 2021 - Elsevier
The main objective of this work is the design, preparation, and characterization of YSZ
coatings by electrophoretic deposition (EPD) technique. The suspensions used for the …
coatings by electrophoretic deposition (EPD) technique. The suspensions used for the …
Design of SrZr0. 1Mn0. 4Mo0. 4Y0. 1O3-δ heterostructured with ZnO as electrolyte material: Structural, optical and electrochemical behavior at low temperatures
Abstract P-type semiconductor SrZr 0.1 Mn 0.4 Mo 0.4 Y 0.1 O 3-δ (SZMMY) is for the first
time composited with n-type ZnO to prepare a solid oxide electrolyte used in fuel cell …
time composited with n-type ZnO to prepare a solid oxide electrolyte used in fuel cell …
Fabrication of yttria-stabilized zirconia/La2O3 composite coating by electrophoretic deposition to improve high-temperature oxidation resistance of stainless steel
L Shi, M Li, Z Liu, Z Zhan, Z Yuan, X Wang - Ceramics International, 2024 - Elsevier
Nanoscale yttria-stabilized zirconia (YSZ) and La 2 O 3 were used to prepare a composite
coating by electrophoretic deposition (EPD) and sintering to improve the high-temperature …
coating by electrophoretic deposition (EPD) and sintering to improve the high-temperature …
Parameters of the electrophoretic deposition process and its influence on the morphology of hydroxyapatite coatings. Review
A Laska, M Bartmański - Inżynieria Materiałowa, 2020 - mostwiedzy.pl
Metallic materials intended for bone implants should exhibit not only appropriate mechanical
properties, but also high biocompatibility. The surface treatment modifications, for example …
properties, but also high biocompatibility. The surface treatment modifications, for example …
Structural characterization of YSZ/Al2O3 nanostructured composite coating fabricated by electrophoretic deposition and reaction bonding
M Ahmadi, H Aghajani - Ceramics International, 2018 - Elsevier
Suspension of YSZ and Al particles in acetone in presence of 1.2 g/l iodine as dispersant
was used for electrophoretic deposition of green form YSZ/Al coating. Results revealed that …
was used for electrophoretic deposition of green form YSZ/Al coating. Results revealed that …
Electrophoretic deposition of ceramic coatings from modified suspensions of microsized powders of doped BaCeO3 and BaCeO3–BaZrO3 proton-conducting …
E Kalinina, E Pikalova - Ceramics International, 2024 - Elsevier
This work investigates the influence of molecular iodine introduced as a charging agent into
the suspensions based on the BaCe 0.8 Sm 0.19 Cu 0· 01 O 3 (BCSCuO), BaCe 0· 5 Zr 0· 3 …
the suspensions based on the BaCe 0.8 Sm 0.19 Cu 0· 01 O 3 (BCSCuO), BaCe 0· 5 Zr 0· 3 …