轴流压气机机匣处理研究进展及评述

卢新根, 楚武利, 朱俊强, 王如根 - 力学进展, 2006 - lxjz.cstam.org.cn
喘振和旋转失速裕度等稳定性问题是压气机设计者所关心的主要问题之一,
不稳定流动大多数情况下都是从压气机端部区域开始的, 如果能够延迟端部区域的失速 …

Estimations of compressor stall and surge using passage stall behaviors

M Akhlaghi, Y Azizi, NM Nouri - Machines, 2022 - mdpi.com
The predictions of the onset of rotating stall and surge are very important in the preliminary
design stage of a compressor. Rotating stall and surge are complex instabilities that cause …

Prediction of compressor stage performance from choke through stall

RL Davis, J Yao - Journal of Propulsion and Power, 2006 - arc.aiaa.org
The results of an investigation in which the predicted aerodynamic performance of the NASA
Stage35 singlestage compressor is compared with the measured experimental data over the …

Numerical investigation of stator suction-type self-circulating casing treatment effects on the aerodynamic performance of a single-stage axial flow compressor

H Zhang, H Wang, J Xiao, Y Feng, W Chu - Physics of Fluids, 2024 - pubs.aip.org
This study addresses the technical challenge that conventional self-recirculating casing
treatments predominantly enhance the compressor stability with minimal efficiency gains …

Investigation of Vaned-Recessed Casing Treatment in a Low-Speed Axial-Flow Compressor, Part II: Unsteady Results

M Akhlaghi, Y Azizi - Aerospace, 2023 - mdpi.com
In this paper, unsteady characteristics of a modified vaned-recessed casing treatment with
23.2% rotor blade tip axial chord exposure were studied numerically. The modifications to …

Computational approach for predicting stall inception in multistage axial compressors

RL Davis, J Yao - Journal of Propulsion and Power, 2007 - arc.aiaa.org
A new time-accurate computational approach for predicting stall inception due to long-and
short-wavelength phenomena in multistage axial compressors is introduced. The …

Investigation of Vaned-Recessed Casing Treatment in a Low-Speed Axial Flow Compressor, Part I: Time-Averaged Results

M Akhlaghi, Y Azizi - Aerospace, 2023 - mdpi.com
This paper investigates the effects of two modifications to a vaned recessed casing
treatment. First, the shape of a circular curve was used in the top of the treated casing …

小流量工况下采用孔式机匣的离心压气机内部流场分析

徐伟, 王彤, 谷传纲 - 中国电机工程学报, 2012 - epjournal.csee.org.cn
实验结果表明, 应用于半开式离心压气机的孔式机匣处理方式可以有效扩大压气机的稳定工作
范围, 而且不会降低压气机的效率. 采用数值计算方法, 比较了某离心压气机叶轮有无孔式机匣 …

[PDF][PDF] Investigation of Vaned-Recessed Casing Treatment in a Low-Speed Axial-Flow Compressor, Part II: Unsteady Results. Aerospace 2023, 10, 763

M Akhlaghi, Y Azizi - 2023 - academia.edu
In this paper, unsteady characteristics of a modified vaned-recessed casing treatment with
23.2% rotor blade tip axial chord exposure were studied numerically. The modifications to …

凹槽导叶式处理机匣轴向叠合量对风扇性能的影响

陈向艺, 楚武利, 张皓光, 王维, 李金鸽 - 航空动力学报, 2018 - jasp.com.cn
为探索凹槽导叶式处理机匣(RVCT) 轴向叠合量对风扇性能的影响, 选取升力风扇为对象,
采用数值模拟方法对实壁机匣和4 种不同轴向叠合量的凹槽导叶式处理机匣进行研究. 结果表明 …