Optoelectrical properties of the ternary chalcogenide SnSb2S5 as a new absorber layer for photovoltaic application
A new material, tin antimony sulfide (SnSb 2 S 5) thin films, considering different thicknesses
(200 nm, 312 nm and 431 nm), were obtained by thermal evaporation onto a glass …
(200 nm, 312 nm and 431 nm), were obtained by thermal evaporation onto a glass …
Tin antimony sulfide (Sn6Sb10S21) thin films by heating chemically deposited Sb2S3/SnS layers: studies on the structure and their optoelectronic properties
Tin antimony sulfide thin films (Sn 6 Sb 10 S 21) were obtained on glass substrates by
heating chemical bath deposited Sb 2 S 3/SnS layers. The report primarily focuses on the …
heating chemical bath deposited Sb 2 S 3/SnS layers. The report primarily focuses on the …
Substrate temperature dependence of structural, morphological and optical properties of Sn4Sb6S13 thin films deposited by vacuum thermal evaporation
In this work, structural and morphological properties of Sn 4 Sb 6 S 13 thin films grown by
single source thermal evaporation were investigated. The films were deposited onto glass …
single source thermal evaporation were investigated. The films were deposited onto glass …
[PDF][PDF] INVESTIGATION OF SUBSTRATE TEMPERATURE EFFECTS ON PHYSICAL PROPERTIES OF ZnTe THIN FILMS BY CLOSE SPACED SUBLIMATION
W Mahmood, NA Shah, S Akram, U Mehboob… - Chalcogenide …, 2013 - researchgate.net
Zinc Telluride (ZnTe) is a semiconductor compound belongs to II-VI group. Over the years
ZnTe have attracted many researchers, because it is widely used in fabrication of solar cells …
ZnTe have attracted many researchers, because it is widely used in fabrication of solar cells …
Effect of air annealing on dispersive optical constants and electrical properties of SnSb2S4 thin films
Y Fadhli, A Rabhi, M Kanzari - Materials science in semiconductor …, 2014 - Elsevier
SnSb 2 S 4 thin films were prepared by thermal evaporation under vacuum onto no heated
glass substrates. The as-deposited films were annealed in air for 1 h in the temperature …
glass substrates. The as-deposited films were annealed in air for 1 h in the temperature …
Determination and Analysis of Optical Constant of Annealed Sn2Sb2S5 Thin Films
Y Fadhli, A Rabhi, M Kanzari - Acta Metallurgica Sinica (English Letters), 2015 - Springer
The effects of annealing on structural, optical and electrical properties of Sn 2 Sb 2 S 5 thin
films were studied. Sn 2 Sb 2 S 5 thin films were deposited on no-heated glass substrates by …
films were studied. Sn 2 Sb 2 S 5 thin films were deposited on no-heated glass substrates by …
Optical Constant and Electrical Resistivity of Annealed Sn3Sb2S6 Thin Films
Y Fadhli, A Rabhi, M Kanzari - Acta Metallurgica Sinica (English Letters), 2016 - Springer
In this study, we report the annealing effects on the physical properties of Sn 3 Sb 2 S 6 thin
films. Sn 3 Sb 2 S 6 thin films were prepared onto non-heated glass substrates via thermal …
films. Sn 3 Sb 2 S 6 thin films were prepared onto non-heated glass substrates via thermal …
Structural, morphological and optical properties of the sulfosalt material SnSb4S7 thin films
In this paper, we report the effect of the substrate temperature on the structural,
morphological and optical properties of SnSb 4 S 7 thin films elaborated by thermal …
morphological and optical properties of SnSb 4 S 7 thin films elaborated by thermal …
Complexing Agent-Dependent Properties of Chemically Deposited Tin Antimony Sulphide Thin Films for Use in Sustainable Energy Devices
PA Nwofe, M Sugiyama - Journal of Electronic Materials, 2022 - Springer
Complexing agents are important in the control of chemical kinetics. Thin films of tin
antimony sulphide (Sn 2 Sb 2 S 5) were deposited on glass substrates and the effect of …
antimony sulphide (Sn 2 Sb 2 S 5) were deposited on glass substrates and the effect of …
The synthesis of GO: SnSbS thin films and the analysis of its electrochemical performance
GO SnSbS thin films were produced by Chemical Bath Deposition (CBD) method on ITO
substrates at different deposition temperatures (20° C, 40° C, 60° C and 80° C). Structural …
substrates at different deposition temperatures (20° C, 40° C, 60° C and 80° C). Structural …