Probing the synergistic effect Ni and Mo contents on microstructure–toughness relationship in super-high strength steel weld metals
L Wang, Y Jiang, X Wan, M Zhong… - … and Technology of …, 2024 - journals.sagepub.com
This study aims to investigate the synergistic effect of Ni-Mo contents on microstructural
evolution in super-high strength steel weld metals, and its following influence on toughness …
evolution in super-high strength steel weld metals, and its following influence on toughness …
Effects of Retained Austenite and Softened Martensite on High‐Cycle Fatigue Behavior of Spring Steel under Two Loading Modes
Q Hao, Q Zhou, Q Yang, K Zhang… - steel research …, 2023 - Wiley Online Library
A novel quenching‐partitioning‐tempering (Q‐P‐T) process is applied to 60Si2Mn spring
steel, resulting in multiphase microstructures consisting mainly of retained austenite (RA) …
steel, resulting in multiphase microstructures consisting mainly of retained austenite (RA) …
Tailoring the Microstructure using Quenching and Partitioning Processing in a Commercial Mn-Si-Cr Spring Steel to Improve Tensile Properties
This study explores a novel approach to quenching and partitioning (Q&P) heat treatment
applied to AISI 9260 spring steel, comprising Fe-0.65 C-1.58 Mn-1.05 Si-0.41 Cr (wt.%). Our …
applied to AISI 9260 spring steel, comprising Fe-0.65 C-1.58 Mn-1.05 Si-0.41 Cr (wt.%). Our …
Microstructure and Friction Response of a Novel Eutectic Alloy Based on the Fe-C-Mn-B System
This paper focuses on the microstructure and tribological properties of novel hardfacing
alloy based on Fe-C-Mn-B doped with Ni, Cr, and Si. The 4 mm-thick coating was deposited …
alloy based on Fe-C-Mn-B doped with Ni, Cr, and Si. The 4 mm-thick coating was deposited …
Using dynamic materials modelling approach to establish critical parameters for hot coiling of spring steels
This study investigated deformation-induced defects in 55Cr3, 54SiCr6, and 52CrMoV4
spring steels through isothermal compression testing using Gleeble 3500 thermomechanical …
spring steels through isothermal compression testing using Gleeble 3500 thermomechanical …
[PDF][PDF] Wlazło-Cwikli nska, M
This paper focuses on the microstructure and tribological properties of novel hardfacing
alloy based on Fe-C-Mn-B doped with Ni, Cr, and Si. The 4 mm-thick coating was deposited …
alloy based on Fe-C-Mn-B doped with Ni, Cr, and Si. The 4 mm-thick coating was deposited …