TiC x-reinforced CrTi 4-based composite coatings were successfully fabricated on a Ti6Al4V
titanium alloy surface via laser cladding technology by using coaxial Ti6Al4V/NiCr-Cr 3 C 2 …

Since aviation sector equipment has evolved to very long-life application conditions, critical
components and structures are regularly subjected to complex environments and applied …

Ultra-high cycle fatigue problem has received more and more attention with the continuous
improvement of the reliability and life index of modern equipment, and has become a hot …

The fracture surface of TC17 alloy tends to exhibit facet characteristic at R> 0, but it presents
rough area morphology at R=− 1 for the internal crack initiation and early growth region. The …

Crack initiation is an essential stage of fatigue process due to its direct effect on fatigue
failure. However, for titanium alloys in high-temperature high cycle fatigue (HCF), the crack …

In this paper, very high cycle fatigue (VHCF) behavior of an additively manufactured (AM) Ti-
6Al-4V by selective laser melting process and post-heat treated by hot-isostatic pressing is …

To study the effect of the aging state on the low-cycle fatigue (LCF) performance of 7075 Al
alloy, LCF experiments with different strain amplitudes (Δε/2= 0.5%-Δε/2= 0.9%) were …

Tensile and fatigue behaviors of a compressor blade titanium alloy TC17 at room and high
temperatures (RT and HT) have been investigated up to very high cycle fatigue (VHCF) …

The surface integrity and fatigue properties of TC17 alloy blades under integrated
manufacturing processes are investigated. The R a values of milling–polishing (MP) …

Ultrasonic fatigue tests were carried out to investigate the effect of stress ratio on the very
high cycle fatigue (VHCF) behaviors of titanium alloy (Ti-8Al-1Mo-1V). The fatigue strength …