The super austenitic stainless steel 1.4529 coating (9 C) was prepared by laser cladding
technology. The microstructures and phase compositions of 9 C and commercial 1.4529 …

A novel system, which systematically recover waste heat and reduce water consumption in
coal-fired power plants, is proposed in this paper. Critical components of the system are two …

Corrosion behavior of laser cladding Ni–Cr–Mo alloy C22 coating, Hastelloy C22 alloy, and
Ti–6Al–4V alloy in simulated desulfurized flue gas condensates (50wt.% H 2 SO 4, 2wt …

Flue gas desulfurization (FGD) technology is now basically compulsory in the fossil power
industry under the pressing environmental challenges globally, and the wet type of it …

For this study, aimed at proposing a potential direction to prevent sulfuric acid dew point
corrosion, a Ni–Cr–Mo alloy Hastelloy C22 coating was fabricated by coaxial laser cladding …

The formation mechanism of non-uniform carbon deposition on the turbine blade under the
gas-solid two-phase flow is analyzed, and the finite element model of turbine blade …

Magnesium (Mg) alloys may be formidable structural metals for automobile and biomedical
applications, but their applications are heavily challenged due to the chemical reactivity of …

In the production of shale gas, solid particles such as gravel and clay can adhere to the pipe
wall surface and generate under-deposit corrosion (UDC). Meanwhile, the adhesion of …

To provide a theoretical basis for the design of super austenitic stainless steel used in flue
gas desulfurization environment, by changing the Cu content in 00Cr20Ni18Mo6CuN super …

Polypentamethylene guanidine sulfate (PPGS), a cationic antibacterial agent with low metal
corrosivity, was synthesized by replacing chloride ions in polypentamethylene guanidine …