Functionalization of Suspension Sprayed HVOF TiO2 Coatings by Direct Laser Interference Patterning
For more than one decade, suspension spraying has been gaining interest for the
development and manufacture of coatings for wide range of applications such as …
development and manufacture of coatings for wide range of applications such as …
Phase transformation of TiO 2 nanoparticles by femtosecond laser ablation in aqueous solutions and deposition on conductive substrates
Titanium dioxide (TiO2) is a wide bandgap semiconductor that is chemically stable, non-
toxic, and economical compared to other semiconductors and has been implemented in a …
toxic, and economical compared to other semiconductors and has been implemented in a …
Synthesis of ruthenium-doped TiO2 nanotube arrays for the photocatalytic degradation of terasil blue dye
AS González, JC Solis-Cortazar… - … of Nanoscience and …, 2019 - ingentaconnect.com
The oxidation of terasil blue dye (TB) has been achieved by photocatalysis under UV light
using well organized nanotubes of Ti/TiO2 doped with ruthenium (Ru/Ti/TiO2). Ru/Ti/TiO2 …
using well organized nanotubes of Ti/TiO2 doped with ruthenium (Ru/Ti/TiO2). Ru/Ti/TiO2 …
Laser-induced changes in titanium by femtosecond, picosecond and millisecond laser ablation
C Yang, Y Tian, L Cui, D Zhang - Radiation Effects and Defects in …, 2015 - Taylor & Francis
In order to realize the qualitative control of the laser-induced changes trend and the
quantitative control of the laser-induced changes range in titanium upon laser irradiation …
quantitative control of the laser-induced changes range in titanium upon laser irradiation …
Infrared nanosecond pulsed laser irradiation of stainless steel: Micro iron-oxide zones generation
M Ortiz-Morales, C Frausto-Reyes… - … Acta Part A: Molecular …, 2014 - Elsevier
Abstract Nanosecond-pulsed, infrared (1064 nm) laser irradiation was used to create
periodic metal oxide coatings on the surface of two samples of commercial stainless steel at …
periodic metal oxide coatings on the surface of two samples of commercial stainless steel at …
[PDF][PDF] 钛酸镧薄膜在1064 nm/532 nm 波长激光辐照下的光学特性
徐均琪， 王建， 李绵， 李候俊， 苏俊宏 - 光子学报, 2018 - researching.cn
采用热蒸发沉积技术制备了钛酸镧(H4) 薄膜, 研究了1064nm 和532nm 波长激光诱导辐照处理
后的薄膜折射率, 消光系数, 激光损伤阈值和损伤过程变迁. 结果表明: 采用不同波长的激光辐照 …
后的薄膜折射率, 消光系数, 激光损伤阈值和损伤过程变迁. 结果表明: 采用不同波长的激光辐照 …
Raman spectroscopic analysis of iron chromium oxide microspheres generated by nanosecond pulsed laser irradiation on stainless steel
M Ortiz-Morales, JJ Soto-Bernal… - … Acta Part A: Molecular …, 2015 - Elsevier
Iron chromium oxide microspheres were generated by pulsed laser irradiation on the
surface of two commercial samples of stainless steel at room temperature. An Ytterbium …
surface of two commercial samples of stainless steel at room temperature. An Ytterbium …
Systematic Comparison of Thermal Annealing and Laser Treatment of TiO2 Thin Films Prepared by Sol-Gel Processing
K Wesang, A Hohnholz, R Jahn, S Steenhusen… - Lasers in Manufacturing …, 2019 - Springer
Thin films with titania composition were prepared on glass substrates by dip-coating from
coating solutions based on soluble precursor powders. The as-dried deposits were …
coating solutions based on soluble precursor powders. The as-dried deposits were …
[PDF][PDF] 超快激光辐照诱导金属钛的变化
杨成娟， 田延岭， 崔良玉， 张大卫 - 红外与激光工程, 2015 - researching.cn
为实现对超快激光诱导金属钛改变趋势的定性控制及材料改变范围的定量控制,
开展了飞秒和皮秒脉冲激光分别与金属钛烧蚀的对比实验研究. 随后使用激光扫描共聚焦显微镜 …
开展了飞秒和皮秒脉冲激光分别与金属钛烧蚀的对比实验研究. 随后使用激光扫描共聚焦显微镜 …
Thermal Annealing and Laser Treatment of Sol-gel Derived Zirconia Thin Films
R Jahn, S Steenhusen, P Löbmann - Lasers in Manufacturing and …, 2020 - Springer
Soluble precursor powders were prepared from zirconium propoxide and acetylacetone by
evaporation of volatile products directly after the hydrolysis step. Dissolution of the solid …
evaporation of volatile products directly after the hydrolysis step. Dissolution of the solid …