Critical comparison of structured contactors for adsorption-based gas separations
Recent advances in adsorptive gas separations have focused on the development of porous
materials with high operating capacity and selectivity, useful parameters that provide early …
materials with high operating capacity and selectivity, useful parameters that provide early …
Heat transfer performance of single atom solution in carbon dioxide capture circulation system
C Zhou, Y Yu, C Zhang, Y Li, Z Zhang… - Applied Thermal …, 2024 - Elsevier
In order to accurately assess the heat transfer performance of the new single atom solution
for carbon dioxide capture, an experimental system and heat transfer model have been …
for carbon dioxide capture, an experimental system and heat transfer model have been …
Mechanism of carbon dioxide adsorption in a highly selective coordination network supported by direct structural evidence
Trapped in a porous material: The position of adsorbed CO 2 in a nanoporous coordination
framework was determined using a combination of techniques including single‐crystal X‐ray …
framework was determined using a combination of techniques including single‐crystal X‐ray …
Measurements and modeling of water adsorption isotherms of zeolite linde-type A crystals
Y Wang - Industrial & Engineering Chemistry Research, 2020 - ACS Publications
A systematic study of water adsorption isotherms of zeolite 3A and 4A crystals over a
pressure range of 10–5 to 10–1 bar and temperatures from 25 to 250° C was carried out …
pressure range of 10–5 to 10–1 bar and temperatures from 25 to 250° C was carried out …
Modeling of rapid temperature swing adsorption using hollow fiber sorbents
The use of novel polymeric hollow fiber contactors loaded with CO 2 sorbents has been
recently demonstrated experimentally as a new and scalable process configuration for post …
recently demonstrated experimentally as a new and scalable process configuration for post …
Polymer‐Sorbent Direct Air Capture Contactors with Complex Geometries 3D‐Printed via Templated Phase Inversion
Low‐cost direct air capture (DAC) systems require efficient gas–solid contactors. These
contactors provide rapid rates of heat and mass transport with minimal pressure drops. Triply …
contactors provide rapid rates of heat and mass transport with minimal pressure drops. Triply …
Poly(amide-imide)/Silica Supported PEI Hollow Fiber Sorbents for Postcombustion CO2 Capture by RTSA
Amine-loaded poly (amide-imide)(PAI)/silica hollow fiber sorbents are created and used in a
rapid temperature swing adsorption (RTSA) system for CO2 capture under simulated …
rapid temperature swing adsorption (RTSA) system for CO2 capture under simulated …
Rapid thermal swing adsorption process in multi-beds scale with sensible heat recovery for continuous energy-efficient CO2 capture
A rapid thermal swing adsorption (RTSA) process with heat integration is considered to be
an energy-efficient method for large-scale CO 2 capture. Herein, we propose a new heat …
an energy-efficient method for large-scale CO 2 capture. Herein, we propose a new heat …
Ethanol-enhanced wash-coating of zeolite 13X on microchannel walls for CO2 capture
Minimizing the energy demand for capturing carbon dioxide (CO 2) from air and post-
combustion sources is critical to mitigate the effects of climate change. Adsorbent-coated …
combustion sources is critical to mitigate the effects of climate change. Adsorbent-coated …
Two Microporous Metal–Organic Frameworks with Suitable Pore Size Displaying the High CO2/CH4 Selectivity
J Li, GP Yang, SL Wei, RC Gao, NN Bai… - Crystal Growth & …, 2015 - ACS Publications
Two microporous metal–organic frameworks,[Zn2 (HDDCBA)]· 2DMF· 2H2O (1) and [Cd2
(DDCBA)· DMA· H2O]· H2N (Me) 2 (2) have been synthesized under solvothermal condition …
(DDCBA)· DMA· H2O]· H2N (Me) 2 (2) have been synthesized under solvothermal condition …