Abstract Al–Zn–Mg–Cu alloys that are prone to segregation and hot cracks always
encounter difficulty in manufacturing large-size workpiece with desirable strength-plasticity …

We investigated the precipitation behavior and mechanical properties of naturally aged Al–
7.6 Zn–2.7 Mg–2.0 Cu–0.1 Zr–0.07 Ti (wt.%) alloy using various experimental methods …

The effects of electrochemical behavior of precipitates and dislocations on the stress
corrosion cracking (SCC) of Al–Zn–Mg–Cu alloys were investigated. Fine anodic η (MgZn 2) …

By using standard melting casting, homogenization, extrusion, solid solution, and T6 aging,
an Al-11Zn-3.1 Mg-1.2 Cu-0.2 Zr-0.16 Ti alloy was created, and the microstructure and …

Here, we have approached to discover new aluminum (Al) alloys with the assistance of
artificial intelligence (AI) for the enhanced mechanical property. A high prediction rate of …

An Al-Zn-Mg-Cu alloy has high specific strength, good corrosion resistance, fracture
toughness and fatigue resistance. It is one of the most important structural materials in the …

The effects of combined Ti and Zr addition on microstructures and mechanical properties are
systematically investigated in Al–Zn–Mg–Cu alloy by microstructure characterizations and a …

For the development of Al–Mg–Si strips with high mechanical performance via twin-roll
casting (TRC) technology, it is necessary to understand through comparative analysis of …

The effect of hot rolling with different rolling deformations on the microstructure evolution and
improvement of mechanical properties of the novel Al–Zn–Mg–Cu alloy are investigated via …

This paper aims to understand the influence of microalloying constituents (Ti, Zr, Sr and Sc),
and three heat treatment conditions ie, T6, retrogression and reaging (RRA) and high …