Influence of TiC content on slurry erosion behaviour of HVOF sprayed titanium carbide and cupronickel-chromium based coatings
V Singh, AK Singla, A Bansal - Journal of Thermal Spray Technology, 2023 - Springer
Abstract Varied compositions of TiC (Titanium Carbide) and CuNi-Cr (Cupronickel-
Chromium) have been examined as coating materials for hydro machinery steel (SS316) …
Chromium) have been examined as coating materials for hydro machinery steel (SS316) …
Response surface methodology (RSM) based analysis on slurry erosion behavior of laser textured and PTFE sprayed VC+ TiC coating deposited via HVOF
V Singh, A Bansal, AK Singla - Materials Today Communications, 2023 - Elsevier
This research article focuses on investigating the slurry erosion behavior of vanadium
carbide (VC)+ titanium carbide (TiC) coating deposited via high-velocity oxy-fuel (HVOF) …
carbide (VC)+ titanium carbide (TiC) coating deposited via high-velocity oxy-fuel (HVOF) …
Influence of laser texturing along with PTFE topcoat on slurry and cavitation erosion resistance of HVOF sprayed VC coating
V Singh, AK Singla, A Bansal - Surface and Coatings Technology, 2023 - Elsevier
This research investigates the slurry and cavitation erosion resistance of a
polytetrafluoroethylene (PTFE) top-coat applied to standalone high velocity oxy-fuel (HVOF) …
polytetrafluoroethylene (PTFE) top-coat applied to standalone high velocity oxy-fuel (HVOF) …
Development, characterization, and cavitation erosion analysis of high velocity oxy-fuel (HVOF) sprayed TiC and (70Cu-30Ni)-Cr based composite coatings on SS316 …
A novel composite coating was developed by depositing powders of Titanium Carbide (TiC)
with Cupronickel (70Cu-30Ni) and Chromium (Cr) as binders onto SS316 steel specimens …
with Cupronickel (70Cu-30Ni) and Chromium (Cr) as binders onto SS316 steel specimens …
Influence of laser texturing on hydrophobicity and slurry erosion behaviour of VC-CuNiCr based HVOF coatings
V Singh, AK Singla, A Bansal - Surface Topography: Metrology …, 2023 - iopscience.iop.org
Superhydrophobic surfaces had gained attention all over the world owing to their unique
properties such as self-cleaning, drag reduction, and anti-bacterial etc. The current research …
properties such as self-cleaning, drag reduction, and anti-bacterial etc. The current research …
Mitigating slurry erosion in martensitic stainless steels through boronizing
N Mohan, G Chaudhari - Materials Today: Proceedings, 2023 - Elsevier
In the present work, two grades of martensitic stainless steels (MSS) samples were
boronized at 950 and 1000° C for 6 h and then tempered at 600° C for 2 h. These samples …
boronized at 950 and 1000° C for 6 h and then tempered at 600° C for 2 h. These samples …
Cavitation Erosion Investigations of Hard Carbide and Nitride Based Novel Coatings Manufactured by Plasma Spraying
P Sharma, V Singh, AK Singla, A Bansal… - Tribology …, 2024 - Taylor & Francis
Cavitation erosion (CE) poses a significant challenge in the operation and maintenance of
hydropower turbines, leading to substantial economic and operational losses. This study …
hydropower turbines, leading to substantial economic and operational losses. This study …
Slurry Erosion Behavior of Ni-Al and Fe-Cr Coatings Deposited by Arc Wire Spray on Hydro Machinery SS316 Steel
This research delves into the slurry erosion behavior of Ni-Al and Fe-Cr coatings, applied
using arc wire spraying (AWS) on hydro machinery SS316 steel. The surface and cross …
using arc wire spraying (AWS) on hydro machinery SS316 steel. The surface and cross …