This review aimed to determine and analyze the current understanding of the origins and
mechanisms of carbonization in different materials: 1) metallic and hard alloys, 2) oxide …

The study is devoted to the development and testing of technological principles for the
manufacture of solid end mills from ceramics based on a powder composition of α-SiAlON, β …

Several sialon ceramics compositions were synthesized by selecting metal oxides (MOs) in
the nanosize range as additives in the oxynitride network. Nanosized precursors, including …

To investigate the effects of Y 2 O 3 on the physical properties and biocompatibility of β–
SiAlON ceramics, β–SiAlON ceramics were prepared with Al, Si, and α–Al 2 O 3 powders …

In this study, coarse Beta silicon nitride (β-Si3N4) powder was used as the raw material to
fabricate dense Si3N4 ceramics using two different methods of ultra-high pressure sintering …

Oxygen-rich SiAlON ceramics doped with various nanosized metal oxide (MO) stabilizers
were synthesized with a view to examine their effect on thermal and mechanical …

The paper studies the influence of diamond grinding, lapping, and polishing on the surface
layer and defectiveness of the Al2O3/TiC and SiAlON ceramic samples. The index of …

Y 2 O 3 and CeO 2 were chosen as additives to investigate the effect of different additives on
the microstructure, composition of phases and mechanical properties of Si 3 N 4/SiC …

To reduce the lattice oxygen content of Si 3 N 4 green bodies, samples were prepared using
an N, N-dimethylacrylamide (DMAA) system. The endothermic and exothermic peaks are …

This research aimed at an increase in wear resistance of round cutting plates manufactured
with SiAlON dielectric ceramics through deposition of wear-resistant coatings. To increase …