Abstract Poly (lactic acid)(PLA) and starch copolymers are obtained by reactive blending‐
varying the starch compositions from 0 to 60%. PLA is functionalized with maleic anhydride …

A commercial epoxy diglycidylether of bisphenol-A (DGEBA) was modified by adding
fluorinated poly (aryl ether ketone) fluoropolymer and in turn metal micro powders (Ni, Al, Zn …

Samples were prepared by addition of a fluorinated poly (aryl ether ketone)(12F-PEK) to a
commercial epoxy resin and curing at either 24° C or 70° C. The concentrations of …

Prepregs of a mixture of the tetrafunctional epoxy tetraglycidyl 4, 4‐diaminodiphenyl
methane (TGDDM) and the tetrafunctional amine 4, 4'‐diaminodiphenylsulfone (DDS) were …

Phenol-formaldehyde resins (PhFR) with reactive methacrylate fragments or labile peroxy
bonds in the side branches used as a polymeric component of bitumen-polymeric mixtures …

Morphology, elastic modulus, static and dynamic friction of a commercial epoxy resin+
fluorinated poly (aryl ether ketone)(12F-PEK) system have been studied. The system was …

Contact angles of free liquids on solid samples were measured and the van Oss–Good
method was applied for evaluating surface tensions of the solids. A parachor method was …

Using light fraction of coal tar (5.75 wt% of coumarone and 44.45 wt% of indene), glycidyl
methacrylate and styrene, the coumarone-indene resin with epoxy groups (CIRE) has been …

We have developed an analytical formula for the cure progress of epoxy systems as a
function of both time t and temperature T. Complex viscosity η* or the storage modulus G …

Volumetric changes were eliminated in processing of a glass fiber reinforced epoxy prepreg;
two components from void elimination and the crosslinking reaction itself were isolated. A …