The dry reforming of methane (DRM) reaction is among the most popular catalytic reactions
for the production of syngas (H2/CO) with a H2: CO ratio favorable for the Fischer–Tropsch …

High fuel flexibility of solid-oxide fuel cells (SOFCs) affords the possibility to use relatively
cheap, safe, and readily available hydrocarbon (eg, CH 4) or coal syngas (ie, CO-H 2 …

Written by engineers for engineers (with over 150 International Editorial Advisory Board
members), this highly lauded resource provides up-to-the-minute information on the …

The increasing demand for energy, coupled with the uncertainty and expense of crude oil
imports, has renewed interest in the production of fuels and chemicals from hydrogen …

Zn, K, and Cu effects on the structure and surface area and on the reduction, carburization,
and catalytic behavior of Fe–Zn and Fe oxides used as precursors to Fischer–Tropsch …

It has been estimated that approximately 60% of all commercial chemicals are now obtained
using processes involving heterogeneous catalysis. In fact, over 90% of all new large-scale …

A broad range of hydrocarbons and oxygenated products can be synthesized catalytically
from CO and H2 produced by the gasification of coal, Since the earliest examples of such …

Iron carbides are unmistakably associated with the active phase for Fischer-Tropsch
synthesis (FTS). The formation of these carbides is highly dependent on the catalyst …

In 1973 the oil crisis prompted considerable world interest in the production of synfuels
which, as a result, led to the development of the Mobil Methanol to Gasoline Process [1] and …

The hydrogenation of carbon monoxide by the Fischer-Tropsch (FT) process [1] forms
saturated and unsaturated compounds of the homologous hydrocarbon series. It permits the …