In the past two years, significant progresses have been achieved in high-performance cast
and wrought magnesium and magnesium alloys, magnesium-based composites, advanced …

Hot compression tests of Mg-Gd-Y-Zr alloy at different deformation temperatures and strains
were carried out with Gleeble-1500 simulator at strain rate of 0.002 s− 1. The microstructure …

The individual effect of DRXed grains, subgrains and deformed grains on the basal texture
of Mg–Zn–Zr alloy during hot tensile deformation was systematically studied by extracting …

This study proposed an effective plastic deformation technique, rotating backward extrusion
(RBE), for producing high performance AZ80 magnesium alloy cup-shaped pieces. The RBE …

In the present work, two processing routes (A and B) with 3 CEE-AEC passes are performed
on Mg–13Gd–4Y–2Zn–0.4 Zr alloys, and the resultant microstructure evolution, texture …

The microstructures and mechanical properties of the composite extruded AZ31/AZ31 and
AZ31/4047 Al sheets were investigated and made a comparison to the conventional …

After homogenization treatment, uniaxial experiments at room temperature with strain rate of
1 s− 1 are carried out on Mg-Gd-Y (-Sn)-Zr alloys, and the maximum strain is controlled to …

Multidirectional forging (MDF) was successfully applied to fabricate large-size Mg-Gd-Y-Zn-
Zr-Ag alloy in this work and effects of T4, T5 and T6 treatments on the microstructure and …

The contribution of recrystallization and grain growth to the texture evolution in AZ31 alloy
and a modified version AZ31+ 0.5 wt.% Ca was investigated utilizing a multi-step annealing …

The microstructure evolution and mechanical properties of as-homogenized Mg-3Al-3Sn-
1Zn (ATZ331) alloy with an initial grain size of∼ 126.7 µm are studied during multi-pass …