Review of ultrasonic vibration-assisted machining in advanced materials
Compared to conventional machining (CM), ultrasonic vibration-assisted machining (UVAM)
with high-frequency and small-amplitude has exhibited good cutting performances for …
with high-frequency and small-amplitude has exhibited good cutting performances for …
Processing technologies for Nomex honeycomb composites (NHCs): A critical review
Nomex honeycomb composites have been paid significant attention for high performance
structural applications in sandwich structures of aircrafts, aerospace, automotive, defense …
structural applications in sandwich structures of aircrafts, aerospace, automotive, defense …
Cutting tool wear prediction in machining operations, a review
In the machining process, tool wear is an unavoidable reason for tool failure. Tool wear has
an impact on not just tool life but also the quality of the finished product in terms of …
an impact on not just tool life but also the quality of the finished product in terms of …
Investigation of surface topography formation mechanism based on abrasive-workpiece contact rate model in tangential ultrasonic vibration-assisted CBN grinding of …
Ultrasonic vibration-assisted grinding is widely used as a highly efficient processing method
for hard-and-brittle materials such as zirconia ceramic materials. Based on the …
for hard-and-brittle materials such as zirconia ceramic materials. Based on the …
Surface integrity and microstructure changes in 3D elliptical ultrasonic assisted turning of Ti–6Al–4V: FEM and experimental examination
Improvement of surface integrity is one of the machining desires where different parameters
are related to this phenomenon. Therefore, the effect of 3D elliptical vibration on different …
are related to this phenomenon. Therefore, the effect of 3D elliptical vibration on different …
Finite element analysis and experimental study on the cutting mechanism of SiCp/Al composites by ultrasonic vibration-assisted cutting
Y Zhou, Y Gu, J Lin, H Zhao, S Liu, Z Xu, H Yu… - Ceramics International, 2022 - Elsevier
SiCp/Al composites are considered difficult to machine due to the relatively high hardness of
SiC particles. In this paper, ultrasonic vibration-assisted cutting (UVAC) technology is used …
SiC particles. In this paper, ultrasonic vibration-assisted cutting (UVAC) technology is used …
Finite element simulation of ultrasonic-assisted machining: a review
Ultrasonic-assisted machining is an advanced method which could improve the process of
machining. Besides, simulation modeling process is a method to help the researchers …
machining. Besides, simulation modeling process is a method to help the researchers …
Molecular dynamics simulations in semiconductor material processing: A comprehensive review
Y Yun, S Wu, D Wang, X Luo, J Chen, G Wang… - Measurement, 2024 - Elsevier
Molecular dynamics (MD) simulations have become a pivotal tool in the nanofabrication of
semiconductor materials, a key area of contemporary semiconductor process research. This …
semiconductor materials, a key area of contemporary semiconductor process research. This …
Multi-response optimization of the actively driven rotary turning for energy efficiency, carbon emissions, and machining quality
Boosting energy efficiency and machining quality are prominent solutions to achieve
sustainable production for turning operations. In this work, a machining condition-based …
sustainable production for turning operations. In this work, a machining condition-based …
3D-FEM approach of AISI-52100 hard turning: modelling of cutting forces and cutting condition optimization
In the present study, a 3D finite element (FE) model for machining AISI-52100 steel was
proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 …
proposed, with respect to three levels of cutting speed (100 m/min, 150 m/min and 200 …